Installation Manual
H3C WA2200 Series WLAN Access Points
Chapter 4 Installation of Outdoor APs
The outdoor models of the WA2200 series are H3C WA2210X-G, H3C WA2220X-AG,
and H3C WA2220X-AGP. You can select an appropriate model according to the actual
requirement. The three outdoor models are waterproof, dustproof, and lightningproof.
4.1 Installation Flowchart
You can install your outdoor AP on a wall or a pole. As a wireless device, the installation
location directly affects the coverage and performance of wireless signals. Therefore, it
is recommended that the AP be installed by a professional. Figure 4-1 shows the
installation flowchart of the outdoor models.
Install the wall-mounting
Figure 4-1 Installation flowchart of the outdoor models
4.1.1 Installing the AP
The following describes how to install the AP on a wall and a pole respectively.
I. Installing the AP on a wall
Figure 4-2 illustrates the installation flowchart of the AP on a wall.
Start
bracket
Fix the AP onto the wall-
mounting bracket or the
mounting plate
Install the outdoor antenna
Install the RF cable
Install the Ethernet cable/
fiber cable
Connect the power supply
End
Chapter 4 Installation of Outdoor APs
Install the fixing support on
the pole
4-1