H3C WA2110-AG Quick Start Manual
Wlan access point
Hide thumbs
Also See for WA2110-AG:
- Installation manual (17 pages) ,
- Quick start manual (31 pages) ,
- Quick start-up (34 pages)
Related Manuals for H3C WA2110-AG
Summary of Contents for H3C WA2110-AG
-
Page 1: Quick Start
H3C WA2110-AG WLAN Access Point Quick Start Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com... - Page 2 However, the statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Hangzhou H3C Technologies Co., Ltd. and its licensors shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 4: Table Of Contents
Table of Contents WA2110-AG quick start guide ·································································································· 3 Prepare for installation ·················································································································· 3 Unpacking and inspection ······································································································· 3 Installation tools ······················································································································· 3 Checking the device before installation ···················································································· 4 Attaching the antennas ················································································································ 4 Connecting the access point to an access controller/unified switch ······································· 4 Mounting the access point ···········································································································... -
Page 5: Prepare For Installation
H3C WA2110-AG WLAN Access Point Installation Guide. The WA2110-AG is a managed wireless LAN access point designed for use with an H3C WX series access controller/unified switch and requires only hardware installation. All configurations for the access point take place on the access controller/unified switch. -
Page 6: Attaching The Antennas
Before mounting the WA2110-AG, connect it to the power adapter (if applicable) and the Ethernet, and check the status of the LEDs to ensure that the WA2110-AG works properly. In addition, record the MAC address of the access point for future use. -
Page 7: Mounting The Access Point On A Tabletop
For easy installation and removal of the access point from the mounting bracket, ensure that there is sufficient flexibility with the cable and that the cable is long enough. H3C recommends using flexible cables. If not enough cable is routed through the back of the mounting bracket, or the cable is inflexible, it can be difficult to install or remove the access point from the mounting bracket. - Page 8 WARNING: When the RF antennas are transmitting data, keep the antennas away from your face, eyes, and other exposed parts of your body. Do not mount the access point on any metal surface. Do not use or manipulate the access point near explosives unless otherwise authorized by relevant authorities.
Need help?
Do you have a question about the WA2110-AG and is the answer not in the manual?
Questions and answers