Rack Configuration Features; Feature Codes For Rack Configurations; Fully Populated Rack Limits For Data Storage - IBM XIV Gen3 Series Planning Manual

Table of Contents

Advertisement

Rack configuration features

You can order an XIV system with a total of six or nine to 15 modules.
Seven-module and eight-module configurations are not supported.
Note: For model 281x-314, a minimum total of nine modules are required, three
data and six interface. For more information, see Rack components.
Table 5 shows the various system configuration options with their feature codes.
Note: The six module feature does not apply to model 281x-314.
The IBM XIV Storage System requires a corresponding software license for each
entitled data or interface module.
Partially populated configurations have the same power, floor planning, hardware,
software, and cabling configurations as fully populated systems. In other words,
partially populated racks are identical to fully populated rack, except that they
have fewer modules and therefore less storage capacity.
Note: XIV systems with less than 13 modules also have fewer usable Fibre
Channel and iSCSI ports. For more information, see Table 11 on page 17.
Fully populated rack (15 modules)
A fully populated rack contains nine data modules and six interface modules, for a
total of 15 modules.
Each module contains 12 1 TB limited capacity, 2 TB, 3 TB, 4 TB, or 6 TB disk drive
modules (DDMs), for a total of 180 DDMs in a fully populated rack (15 modules x
12 DDMs).
Note: Only the 4 TB and 6 TB DDM options are available for model 281x-314.
Table 6 shows the various configuration limits for a fully populated rack's data
storage.
12
IBM XIV Gen3 281x-11x, 281x-21x, and 281x-314 Planning Guide
Table 5. Feature codes for rack configurations
Feature description
6 module initial capacity
9 module initial capacity
10 module initial capacity
11 module initial capacity
12 module initial capacity
13 module initial capacity
14 module initial capacity
15 module initial capacity
Table 6. Fully populated rack limits for data storage
Hard drive size
1 TB
Feature code
0806
0809
0810
0811
0812
0813
0814
0815
Total usable capacity
81 TB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xiv gen3 281-11 seriesXiv gen3 281-21 seriesXiv gen3 281-314 series

Table of Contents