Job Commands For Freeform Master Jobs; Filtering Jobs In The Freeform Window - Toshiba e-studio 45 Operator's Manual

1
1-30 About the Command WorkStation (Option)

Job commands for FreeForm master jobs

The following job commands, described on page 1-22, can be used with jobs in the
FreeForm window:
• Delete
• Associated variables
• Properties
• Thumbnail A
• Thumbnail B
The Associated variables command is available only by right-clicking a
N :
OTE
FreeForm Master job. Selecting this command displays all jobs that have used that
specific FreeForm Master as a master document.

Filtering jobs in the FreeForm window

The FreeForm window displays a cumulative list of all FreeForm Masters. If the
window contains a large number of FreeForm Masters, you may want to display only a
specified subset of these jobs. You can do this by filtering jobs in the FreeForm window.
The Filter command for the FreeForm window works exactly the same way as the
Filter command for the Archive window. For instructions on using this feature, see the
description in "Filtering jobs" on page 1-35.