Cables And Accessories; Removing Modules From The Cdaq Chassis - National Instruments NI cDAQ-9181 User Manual

Cables and Accessories

Table 1-8 contains information about cables and accessories available for the cDAQ chassis. For
a complete list of cDAQ chassis accessories and ordering information, refer to the pricing
section of the cDAQ-9181/9184/9188/9191 product page at
Accessory
NI 9901 desktop mounting kit
NI 9903 panel mount kit
NI 9904 panel mount kit
NI 9905 panel mount kit
NI 9912 DIN rail mounting kit
NI 9913 DIN rail mounting kit
NI 9915 DIN rail mounting kit
NI 9925 IP enclosure
2-pos screw terminal kit for power
supply connection, qty 4
CAT-5E Ethernet cable, shielded,
(2 m, 5 m, and 10 m lengths)

Removing Modules from the cDAQ Chassis

Complete the following steps to remove a C Series module from the chassis.
1. Make sure that no I/O-side power is connected to the module. If the system is in a
nonhazardous location, the chassis power can be on when you remove modules.
2. Squeeze the latches on both sides of the module and pull the module out of the chassis.
Table 1-8. cDAQ Chassis Cables and Accessories
NI cDAQ-9181/9184/9188/9191 User Manual
ni.com
Part Number
779473-01
781722-01
779097-01
779558-01
779019-01
781740-01
779018-01
781723-01
780702-01
151733-02/05/10
.
cDAQ Chassis
cDAQ-9184/9188
cDAQ-9181/9191
cDAQ-9184
cDAQ-9188
cDAQ-9184
cDAQ-9181/9191
cDAQ-9188
cDAQ-9181/9191
All
All
© National Instruments | 1-31