Special Guidelines For Marine Applications; Hardware Symbol Definitions - National Instruments NI cDAQ-9181 User Manual

Chapter 1 Getting Started with the cDAQ Chassis

Special Guidelines for Marine Applications

Some products are Lloyd's Register (LR) Type Approved for marine (shipboard) applications.
To verify Lloyd's Register certification for a product, visit
search for the LR certificate, or look for the Lloyd's Register mark on the product label.
Caution
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.

Hardware Symbol Definitions

The following symbols are marked on your cDAQ chassis.
Caution
section for information about precautions to take.
When this symbol is marked on a product, the product could be damaged if
ESD
subjected to Electrostatic Discharge (ESD) on the connector pins of any I/O port.
To prevent damage, industry-standard ESD prevention measures must be employed
during installation, maintenance, and operation.
EU Customers
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
.
weee
(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
1-4 | ni.com
In order to meet the EMC requirements for marine applications, install the
When this symbol is marked on a product, refer to the
At the end of the product life cycle, all products must be sent to
National Instruments
National Instruments
ni.com/certification
RoHS
(For information about China RoHS compliance,
.)
Safety Guidelines
ni.com/environment/
ni.com/
and