4.2
Differential Pressure Transmitter
The sensors of this differential pressure transmitter are two piezoresistive silicon pressure
sensors, mounted on a tape (TAP) freely floating in an oil chamber. The pressure is
transferred to the sensor by a separate steel diaphragm in the oil chamber.
Specifications
Range(FS):
Over-pressure- Pmax:
Class of protection :
Output Signal:
Supply:
Load Resistance:
:
Linearity:
Stability:
Operating temperature:
Storage Temperature:
Material: Body and diaphragm: 1.4435 Stainless steel
Screw joint and cover: Steel electroplated for Emetorpipe d=8mm
4 bar
differential
16 bar
single-sided
IP 65
0,5 – 4,5 V DC (ratiometric)
5 VDC +/- 10 %
> 5 kΩ
±0.20 % FS; max. ±0.5% FS
±0.1 % FS; max. ±0.2% FS
-10...+80°C
-40...+80°C
P -
P +
10
Series PD 39 M
Plug: mPm 193
Incl. 2m cable:
Out (white)
+ Vcc (brown)
GND (green)
Screen