Alliance Laundry Systems 0904004427 Installation Operation & Maintenance
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Dryer
  5. 0904004427
  6. Installation operation & maintenance
Alliance Laundry Systems 0904004427 Installation Operation & Maintenance

Alliance Laundry Systems 0904004427 Installation Operation & Maintenance

50 pound (25 kilogram) capacity; 75 pound (34 kilogram) capacity
Hide thumbs
Table of Contents

Advertisement

Quick Links

Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
50 Pound (25 Kilogram) Capacity
75 Pound (34 Kilogram) Capacity
Starting Serial No. 0904004427
Refer to Page 9 for Model Identification
www.alliancelaundry.com
Tumble Dryers
TMB1277C_SVG
Part No: 70457901ENR15
June 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0904004427 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems 0904004427

Summary of Contents for Alliance Laundry Systems 0904004427

  • Page 1 Tumble Dryers 50 Pound (25 Kilogram) Capacity 75 Pound (34 Kilogram) Capacity Starting Serial No. 0904004427 Refer to Page 9 for Model Identification TMB1277C_SVG Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No: 70457901ENR15 www.alliancelaundry.com...
  • Page 3 Never start the tumble dryer with any guards/panels removed. • Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumble dryer is properly grounded. W002R1 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 4 A “T-Handle” type gas shut-off valve must be installed in the gas supply line to this appliance. • This appliance must not be installed in a bedroom or bathroom. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 5: Table Of Contents

    Exhaust Requirements................37 © Copyright 2017, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 6 Models Starting Serial No. 0909xxxxx............65 Resetting Cycle Time to Zero.................65 Dipswitch Settings..................66 Topoffs......................69 Temperature Selector Switch................69 To Program a Short Test Cycle............... 69 Error Codes....................69 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 7 Drive Belt - Reversing Models............... 92 Maintenance..................94 Daily......................94 Monthly....................... 94 Quarterly......................94 Bi-Annually....................95 Annually...................... 95 Fire Suppression System (Optional Equipment) Maintenance Test.....95 Before You Call for Service..............97 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 8 Removing Tumble Dryer from Service..........98 Disposal of Unit..................99 China Restriction of hazardous substances (RoHS)......100 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 9: Introduction

    UU050L LU050T YT050T HH050N PH050L UU050N MT050S YU050S HK050N PH050N YT050L MT050T YU050T HT050D PK050N YT050N HT050L PT050L YU050L HT050N PT050N YU050N HU050L Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 10 PT075L UU075R HK075N PT075N YT075L HK075R PU075L YT075N HT075D PU075N YU075L HT075L SA075L YU075N HT075N SA075N Explanation of digit in 6th position of model number: © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 11: Contact Information

    If you are unable to locate an authorized service center or are un- Phone: +1 (920) 748-3121 satisfied with the service performed on your unit, contact: Alliance Laundry Systems © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 12: Manufacturing Date

    The first two digits indicate the year. The third and fourth digits indicate the month. For example, a unit with serial number 1505000001 was manufactured in May 2015. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 13: Safety Information

    Save These Instructions • Cleaning and user maintenance shall not be made by children • Read all instructions before using the tumble dryer. without supervision. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 14 ALWAYS disconnect and lockout the electrical power to the tumble dryer before servicing. Disconnect power by shut- ting off appropriate breaker or fuse. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 15: Specifications And Dimensions

    1100 [519] C.F.M. [L/sec] Gas/Steam 60 Hz 750 [354] 60 Hz 920 [434] 50 Hz 625 [295] 50 Hz 750 [354] Electric 750 [354] Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 16: Specifications

    210,300 [98.5] Not Applicable Btu/hr. [kg/hr.] (recommended operating pressure 80-100 psig) NOTE: All machines are shipped with extra nipple to convert to metric thread (from Standard). © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 17: Cabinet Dimensions

    050 Series Gas 33 in. [838 7.1 in. [180 5.5 in. [140 6.53 in. [166 29.5 in. [749 33.24 in. [844 and Electric mm ] Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 18: Exhaust Outlet Locations

    5.375 in. [137 mm ] 8 in. [203 mm ] 13.375 in. [340 mm ] 6.5 in. [165 mm] 10 in. [254 mm ] 6.5 in. [165 mm] © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 19: Gas Connection Locations

    Specifications and Dimensions Gas Connection Locations TMB2239N_SVG Diameter 050/075 – 1/2 in. NPT 14.75 in. [375 mm] 65.75 in. [1670 mm] F75 – 3/4 in. NPT © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 20: Electrical Connection Locations

    Electrical Connection Locations TMB2240N_SVG 1. Gas and Steam 2. Electric 3.25 in. [83 mm] 75.5 in. [1918 mm] NOTE: These figures are approximate dimensions only. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 21: Steam Connection Locations

    Specifications and Dimensions Steam Connection Locations TMB2425N_SVG Diameter 3/4 in. NPT 15.25 in. [387 79.23 in. [2013 7.5 in. [190 mm] 64.64 in. [1642 78.14 in. [1985 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 22: Installation

    To reduce the risk of severe injury, clearance of tum- ble dryer cabinet from combustible construction must conform to the minimum clearances, and/or lo- cal codes and ordinances. W770R1 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 23: Position And Level The Tumble Dryer

    Refer to Figure 3 . Tumble dryer must not rock. Lock leveling legs with nuts previously instal- led. T483I_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 24: Fire Suppression System (Optional Equipment)

    If the rear of the tumble dryer or the water supply is located in an Figure 4 area where it will be exposed to cold/freezing temperatures, pro- visions must be made to protect these water lines from freezing. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 25: Electrical Requirements

    Part No. 20618 Inlet hose 10 feet [3.05 m] NOTE: Replacement outlet hoses are available (at extra cost). Order 44073301 Hose, 39 in. [99 cm ]. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 26: Bolt-On Angle Option

    36 inch [914 mm] door opening (actual 34.5 inches [876 mm ]). 1. Remove the loading door, access panel, front panel and lint panel. Refer to Figure 7 . © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 27: To Reverse The Loading Door

    1. Disconnect power supply to tumble dryer. 2. Unlock and remove control panel. Remove two control as- sembly mounting screws from right side. Swing open control © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 28 Reinstall switch, orienting button toward center of machine. Reinstall plug in switch’s previous location. Refer to Figure 11 . © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 29: Before Placing Tumble Dryer Into Service

    Loading Door Switch section for adjustment pro- Adjustments section. cedure. Tumble dryer should not start with door open; an operating tumble dryer should stop when door is opened. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 30 Press reset button on Australia rear of machine T30, T45: Press lighted reset button in rear contactor box All others Open loading door Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 31: Required For Ce Models Only

    This information is to be used when installing gas tumble dryers Serial plates supplied from the factory are configured for in countries and/or on gases different than the machine’s factory GB/IE/PT/ES/IT/GR/LU/CH/BE. These instructions pertain to © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 32: Ce Orifices

    10 [25, 2.5] 5.06 [12.6, 0.1440 M40099 1.26] [3.7] 0.1405 M40101 [3.6] 8 [20, 2.0] Unregulated 0.1200 M40101 [3.0] 0.1160 M40102 [2.9] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 33: Properties Of Ce Gases

    Not Ap- 1226 1362 1014 0.555 2H,E plicable [45.67] [34.02] [50.72] [37.78] Not Ap- 1004 1115 0.612 plicable [37.38] [29.25] [41.52] [32.49] Table 2  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 34: Changing Gas Configuration

    (located ahead of the tumble dryer) that will main- tain the gas supply at the inlet pressure specified. W430R1 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 35: Specific Conversion Procedures

    NOTE: Blank burner orifices are Part No. M400995. 3. Install the new, correct burner orifice(s). Refer to Figure 17 and Table 1 . Torque each to 9 – 10 Nm. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 36 Re- place regulator cap. Refer to Figure 1. 5. Commission tumble dryer for use. Burner Orifice TMB2015N_SVG 1. Size Stamped on Orifice Figure 17 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 37: Exhaust Requirements

    Proper sized exhaust ducts are essential for proper operation. All elbows should be sweep type. Exhaust ducts must be assembled © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 38 NOTE: Inside of duct must be smooth. Do not use sheet metal screws to join sections. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 39: Individual Venting

    Figure 19 = 14 ft. [4.3 m] + (2) 90° elbows = 14 ft. [4.3 m] + 14 ft. [4.3 m] + 14 ft. [4.3 m] © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 40 NOTE: Table 4 represents tumble dryers with the same NOTE: Duct clean-out recommended every 6 feet [0.18 vent size. If multiple vent sizes are used, consult a lo- cal HVAC specialist. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 41 1. Outlet duct diameter = combined largest duct diameter of both sides 2. 45° typical Figure 21 Refer to Table 4 for measurements for each manifold. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 42: Gas Requirements

    In Australia and New Zealand , installation must comply with the Gas Installations Standard AS/NZS Maximum 13 in. w.c. 3.23 kPa 32.3 mbar 5601 Part 1: General Installations. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 43 To reduce the risk of explosion or fire, DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS! Gas connections should be checked twice a year for leak- age. W635 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 44: Gas Supply Pipe Sizing And Looping

    Other gas using appli- ances should be connected upstream from loop. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 45: Low Pressure Gas Pipe Sizes

    2-1/2 2-1/2 2-1/2 1,300,000 2-1/2 2-1/2 2-1/2 2-1/2 1,400,000 2-1/2 2-1/2 2-1/2 2-1/2 1,500,000 2-1/2 2-1/2 2-1/2 2-1/2 1,600,000 2-1/2 2-1/2 2-1/2 Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 46 3-1/2 For L.P. Gas, correct the total Btu/hr by multiplying it by 0.6. The answer is the equivalent Btu on the above chart. Table 5 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 47: High Pressure Gas Pipe Sizes

    140,000 160,000 180,000 200,000 300,000 400,000 500,000 600,000 700,000 800,000 900,000 1,000,000 1,100,000 1,200,000 1,300,000 1-1/4 1,400,000 1-1/2 1,500,000 1-1/4 1,600,000 1-1/4 Table 6  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 48: High Altitude Burner Orifice Sizing

    For proper operation at altitudes above 2000 feet [610 m], the gas For CE models, consult local gas supplier. burner orifice size must be reduced to ensure complete combus- tion. Refer to Table 7 . © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 49 [174] 4001-6000 0.0785 [2.0] M400999 138,600 [1221-1830] [146] 6001-8000 0.0785 [2.0] M400999 125,400 [1831-2440] [132] 8001-10,000 0.0760 [1.9] M401001 112,200 [2441-3050] [118] Table 7  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 50 [237] 4001-6000 0.0935 [2.4] M403017 189,000 [1221-1830] [199] 6001-8000 0.0890 [2.3] M406184 171,000 [1831-2440] [180] 8001-10,000 0.0860 [2.2] M401001 153,000 [2441-3050] [161] Table 7  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 51 Number [Mj/hr.]* * Btu/hr. derate of 4% per 1000 feet [305 meters] of altitude. NOTE: Eco line is only available in natural gas. Table 7 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 52: Electrical Requirements

    W943 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 53 H1-P11 WHT COIN 2 COIN COMMON H2-P8 PNK/BLK CP INPUT CYCLUS MACHINE H2-P10 WHT BUSY TMB2407N_SVG 1. DX4 Control 2. CP Board 3. Central Pay System Figure 25 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 54: Grounding Instructions

    All electrical connections should be made by a qualified electrician. Never attempt to connect a live circuit. W409R1 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 55: Service/Ground Location

    Electrical Requirements Service/Ground Location Ground and Terminal Block Locations for Non-CE Models TMB2269N_SVG 1. Junction Box 2. Terminal Block 3. Earth/Ground 4. Electrical Service Figure 26 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 56: To Connect Electrical Service To The Tumble Dryer

    If the cylinder rotates clockwise (viewed from the front), the phase sequence is correct. If the cylinder rotates counterclockwise, proceed with step b. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 57: Ferrite Ring Installation

    2. Snap the ferrite ring closed over all the service leads inside of the contactor box as shown. It is important that the ferrite ring © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 58 Electrical Requirements Non-CE Models TMB2270N_SVG CE Models TMB2271N_SVG 1. Ferrite Ring 2. Junction Box 3. Models Through 7/31/11 Figure 28 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 59: Electrical Specifications

    10A – 3 pole 14 [2.5 ] 460-480V/60Hz/3ph L1, L2, L3 and ground 10A – 3 pole 14 [2.5 ] N/A = Not Applicable Table 8 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 60 15A – 3 pole 14 [2.5 ] 460-480V/60Hz/3ph L1, L2, L3 and ground 10A – 3 pole 14 [2.5 ] N/A = Not Applicable Table 10 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 61 L1, L2, L3 and ground 28.4 28.4 40A - 3 pole 8 [10] 460-480V/60Hz/3ph L1, L2, L3 and ground 26.9 26.9 35A - 3 pole 8 [10] Table 12 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 62: Steam Requirements

    If pockets or im- proper drainage cannot be eliminated, install a bypass trap to drain condensate from the low point in the steam header to the return. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 63 8. 18 in. [460 mm] Drop 9. Solenoid Valve (Supplied with machine) 10. Steam Bonnet 11. Flexible Line 12. Union 13. Trap with Built-In Strainer Figure 29 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 64: Piping Recommendations

    18 inches [460 mm] below the steam coil outlet connections. 4. Install a shut-off valve to each steam trap. 5. Connect to the condensate return lines. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 65: Single Drop Timer

    To remove any cycle time that may have accumulated on the con- trol during setup, the cycle time on the control can be reset to zero. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 66: Dipswitch Settings

    Dipswitch Settings Models Through Serial No. 0908xxxxx Heat Time Heat Switch Number Per Coin Pulse (in minutes) 8 (factory de- fault) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 67 Single Drop Timer Heat Time Heat Switch Number Per Coin Pulse (in minutes) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 68 Heat Time Heat Switch Number Per Coin Pulse (in minutes) Cool Down Switch Number Cool Down Per Cycle (in minutes) 1 (factory default) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 69: Topoffs

    Error Codes Display Definition Corrective Action AF (flashing) Airflow switch opened/closed 5 or more Check airflow switch. Replace if inopera- times in a running cycle. tive. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 70: Operating Instructions

    To restart machine, pull red emergency stop button out and press START pad or button. b. Close loading door. Tumble dryer will not operate with the door open. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 71: Reversing Operation

    5. Press and release START button to start tumble dryer. Display HIGH Temperature 190°F [88°C] will show minutes remaining before end of cycle. Temperature 170°F [ 77°C] Temperature 120°F [49°C] © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 72 Check airflow switch. Replace if inoperative. AF - 2 Airflow switch failed to close after cycle • Check airflow switch. Replace if inoperative. started Table 14  continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 73: Electronic Opl Micro Control

    To use a Time Dry or Custom Cycle, refer to the Programming Manual. REVERSING TMB1486N_SVG Figure 39 3. Press START pad to start tumble dryer. TMB1485N_SVG Figure 40 TMB1483N_SVG Figure 37 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 74: Single Drop Control

    1. Select temperature by pressing the appropriate temperature pad. HIGH Temperature 190°F [88°C] Temperature 180°F [82°C] Temperature 160°F [72°C] DELICATES Temperature 130°F [54°C] TMB2147N_SVG Figure 42 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 75: Quantum Control

    4. When the cycle is complete, open door and remove the laun- dry. WARNING To prevent the risk of fire, remove laundry imme- diately in case of power failure. W779 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 76: Galaxy 600 Control

    IMPORTANT: To stop the tumble dryer at any time during a cycle, OPEN DOOR. To restart the tumble dryer, CLOSE door and press START pad. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 77: Led Opl Control

    18 TMB1346R_SVG hours or until the door is opened. Figure 50 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 78: Unilinc Control

    BACK Figure 51 C, D, and I Models TMB2370N_SVG Figure 54 L and P Models Starting 6/1/15 TMB1375R_SVG Figure 52 TMB1464R_SVG Figure 55 UniLinc Control © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 79: Dx4 Coin Control

    4. Press and release one of the cycle buttons to select a cycle and start the tumble dryer. Refer to Table 15 . TMB2266N_SVG To use a custom cycle, refer to the Programming Manual. Figure 57 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 80: Dx4 Opl Control

    [85º/91ºC] is equipped for reversing. The operator may also reprogram the default programs. See Programming. 2 – Sheets 165ºF [74ºC] Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 81 7. Use the Up/Down arrows to change the dwell time within the Down arrows. range of 3-10 seconds. 8. Press the REV button to display the counterclockwise time. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 82: Dmp Opl Models

    “r##” where ## are the RPM’s. (Only available on tumble dryers with the rotation sensor.) DMP OPL Models DO and RD Control Suffix © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 83 Coin Tumble dryer Type OPL=Off; Coin=On Temperature Units ºF=Off; ºC=On Local/Remote Reversing Local=On; Remote=Off Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 84: Dmp Coin

    “OFF” indicates that the buzzer will sound for 5 seconds when the drying cy- DMP Coin DV and DX Control Suffixes © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 85 “PAy” and the DRYING and COOLING LEDs will be off until coins are deposited to increase the tumble dryer run time. When - MEDIUM equal to 150ºF [66ºC] © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 86: Ignition Control Operation And Troubleshooting For Models Starting 3/11/13

    1. 24 VAC present between 24V and ground on 70458701 only. If not, see machine schematic. 2. 24 VAC present between TH and ground. If not, see machine schematic. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 87: Proper Electrode Location

    5 seconds. Alternately, a Digital Voltmeter may be used to measure the DC voltage between the FC+ and FC- terminals. Each micro-amp of © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 88: Ignition Control Operation For Ce Models Through 3/10/13

    Reset Light turns off, stop pressing the switch. Holding the Start Up Mode. reset for three seconds after lockout has been cleared will cause a fault and result in entering Lockout Mode again. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 89: System Tests

    The Diagnostic LED will flash error codes one half second on and one half second off. Error codes are separated by a one sec- ond pause before the code is repeated. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 90: Adjustments

    Adjust air shutter as fol- lows: Refer to Figure 63 . 1. Open the upper front access panel and remove the burner in- spection hole plate. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 91: Airflow Switch

    4. Air Shutter Adjusting Screw to achieve proper actuation. Figure 64 Airflow Switch The airflow switch is set at the factory for proper operation. No adjustment necessary. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 92: Loading Door Catch

    1. Door Latch 5. Idler Housing Assembly 2. Door Catch 3. Acorn Nut Figure 67 Drive Belt - Reversing Models Figure 66 Refer to Figure 68 . © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 93 2. Adjusting Nut 3. Adjusting Screw 4. Cylinder Belts 5. Guide Rail 6. Idler Housing Bolts (2) 7. Adjusting Bolt (Not shown) 8. Drive Belt Figure 68 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 94: Maintenance

    6. Models equipped with a fire suppression system: Perform the fire suppression system maintenance test by pressing the test button in the control box. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 95: Bi-Annually

    Refer to Figure 70 and Figure 71 . system maintenance test.) 8. Immediately remove and weigh the load. Refer to Table 18 for acceptable weight range. If less than minimum pounds in- © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...
  • Page 96 13. On maintenance record, check box if fire suppression system passed the test, date and sign record. TMB2010N_SVG 1. Spray Manifold 2. Water Spray Figure 71 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 97: Before You Call For Service

    Tumble dryer is in Cool Down Mode. • • Lint screen clogged. Clean lint screen. • • Exhaust duct to outside is blocked. Clean out. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 98: Removing Tumble Dryer From Service

    4. Turn off manual gas shut-off valve on machine. 5. Turn off steam supply external to machine. 6. Remove all electric, gas and steam connections. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 99: Disposal Of Unit

    MIX1N_SVG Figure 72 © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

  • Page 100: China Restriction Of Hazardous Substances (Rohs)

    NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal oper- ating use conditions of the product such as temperature and humidity. This product under normal use, durable years of environmental protection is 15 years. © Copyright, Alliance Laundry Systems LLC - Part No: 70457901ENR15 DO NOT COPY or TRANSMIT...

Table of Contents

Save PDF