LOCK
Parental control setup. Default password is 9999.
Change Password
System Lock
Input Block
US
Canada
Change password used to enter the setup menus. To change:
1.
Use the up/down arrow buttons to select Change Password.
2.
Press the right arrow button.
3.
Enter old password.
4.
Enter new password
5.
Reenter new password.
6.
If the two new passwords do not match a warning box will appear. Re-enter the new password.
Just enter the new password numbers. Entry will automatically go to Confirm Password when
a number is entered. If you want to start over press the ESC button on the IR remote.
When the last number is entered set will automatically go back to the lock menu.
Set to On to set active inputs and Parental Control (V-Chip) settings.
Used to disable unused input(s) for source selection. To change use the up/down arrow buttons to
select the input to be disabled or enabled. Press the left/right arrow buttons to change from UnBlock
and Block. Blocked inputs will not be shown in the source selection OSD menu.
When finished press SETUP to exit.
Settings for United States Parental Control. (V-Chip)
TV
Parental control settings for TV shows.
MPAA
Parental control settings for movies.
Settings for Canadian Parental Control. (V-Chip)
Canada Eng
English parental control setting for Canada
Canada Fre
French parental control settings for Canada
HealthCare Information, LLC
Block
Disables
UnBlock
Enabled
22