HealthCare Information RM22III Operation Manual page 25

Power On Channel Channel the set will tune to when set is turned on. Power On Source must be set to TV.
Power Rolling When ON set will turn on and off when between the highest and lowest programmed channel when using
the channel up/down buttons. This is for old 1 button analog pillow speakers.
Source Rolling When ON set will scroll through the active input sources in addition to the active channels when using the
channel up/down buttons. Sources will be between the highest and lowest programmed channels. This is
for old 1 and 3 button analog pillow speakers or digital pillow speakers without a source button.
Keypad Lock Disables front or side keypad buttons. Selections are:
VCT Table Select
LED Operate Mode
Bluetooth Remote
CEC Power Function
Other
Input Auto Detect
Update USR Version
Reset Android
Reset Android Mode
Note:
Message Sound
Message Sound Volume
Exit
LOCK OFF – LOCK MODE 1 – LOCK MODE 2 – LOCK ALL
LOCK OFF Normal operations. All buttons function.
LOCK MODE 1 Only POWER button functions.
LOCK MODE 2 Only POWER , CH+, CH-, VOL+ and VOL- buttons function.
LOCK ALL No buttons function.
NOTE: IR and pillow speaker functions are not affected by the Keypad Lock setting.
Lock Mode Channel lineup is fixed. Digital channels will not automatically update.
Auto Mode 1 Channels are locked after auto scan. All found channels will be available.
Auto Mode 2 Channels maybe added and deleted when in factory mode.
Sets the Power LED operating conditions. Selections are:
ALWAYS OFF – IR-BLINK-ON – IR-BLINK-OFF – ON IF TV ON – OFF IF TV OFF – ALWAYS ON
ALWAYS OFF
IR-BLINK-ON
IR-BLINK-OFF
ON IF TV ON
OFF IF TV ON
ALWAYS ON
Future use.
When on allows a DVD player to be turned on and off via CDC command through the HDMI cable.
Note: DVD player must be CEC compatible and connected to the set via an HDMI cable.
When ON and signal is lost the set will return to the previous source in 15 seconds.
Not used.
Resets the Android operating system.
Settings for automatically resetting Android. Selections are:
No Auto Reset – Auto Reset With Clock – Auto Reset At TV Off
No Auto Reset
Auto Reset With Clock
Auto Reset At TV Off
For Auto Reset With Clock to work the correct time must be set. See page 19.
When Android is reset there will approximately 2 minutes that the set will show off line on
MediaCare. During this time set can not be controlled and any events scheduled during the reset
interval will be missed. Currently playing media will be stopped and will not resume.
Turns message sound ON and OFF. This is a tone that is used when a message is sent to the TV via
MediaCare.
Sets message sound volume.
Return to previous menu.
HealthCare Information, LLC
Power LED is always off. Does not blink.
Power LED is on when TV is on and blinks off with control input.
Power LED is off when TV is on and blinks on with control input.
Power LED is on when TV is on. Does not blink.
Power LED is off when TV is no. Does not blink.
Power LED is always on. Does not blink.
Android will not be automatically reset.
Resets Android at a specific time.
Resets Android every time set is turned off.
25