Inventory List - IBM EXP5060 Quick Start Manual

Inventory list

The following illustration and inventory list show the items that you need to install the storage expansion
enclosure in the rack cabinet. If any items are missing or damaged, contact your place of purchase.
Notes:
1. The illustration might differ slightly from your hardware.
2. Depending on your EXP5060 order, your shipping box might contain additional materials that are not
shown in the following illustration.
Clip nuts (4)
M5 x 8 mm
screws (16)
Handles (4)
Bezel
Disk drive module
(20 or more)
After you unpack the EXP5060, verify that you have the following items:
v 4U-high storage expansion enclosure (1)
– Drive drawer assemblies (5)
– Fan assemblies (2)
– Power supplies (2)
Rear brackets
Support rails
Drive drawer
assembly (5)
Fan
assembly (2)
Small Form-factor
Pluggable transceivers (pre-installed)
AC power cord (2)
Fibre Channel
cable
Power
supply (2)
ESM (2)
Storage
expansion
enclosure
5