Weldtronic TTIG200PADP Operating Manual page 9

Symbol usage
Means Warning! Watch Out! There are possible hazards with this procedure! The possible
hazards are shown in the adjoining symbols.
▲ Marks a special safety message.
Arc Welding Hazards
▲
The symbols shown below are used throughout this manual to call attention to and identify
possible hazards. When you see the symbol, watch out, and follow the related instructions to avoid
the hazard. The safety information given below is only a summary of the more complete safety
information found in the Safety Standards. Read and follow all Safety Standards.
▲
Only qualified persons should install, operate, maintain, and repair this unit.
▲
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks or severe burns. The electrode and
work circuit is electrically live whenever the output is on. The input power circuit and
machine internal circuits are also live when power is on. In semi-automatic or automatic
wire welding, the wire, wire reel, drive roll housing, and all metal parts touching the
welding wire are electrically live. Incorrectly installed or improperly grounded equipment
is a hazard.
 Do not touch live electrical parts.
 Wear dry, hoIe-free insulating gloves and body protection.
 Insulate yourself from work and ground using dry insulating mats or covers big enough to prevent any
physical contact with the work or ground.
 Do not use AC output in damp areas, if movement is confined, or if there is a danger of falling.
 Use AC output ONLY if required for the welding process.
 If AC output is required, use remote output control if present on unit.
 Disconnect input power or stop engine before installing or servicing this equipment. Lockout/tagout input
power according to Safety Standards.
 Properly install and ground this equipment according to its Owner's Manual and national, state, and local
codes.
TitanMig 195/225 Operators Manual
Issue. A 0415
This group of symbols means Warning! Watch
Out! Possible ELECTRIC SHOCK, MOVING PARTS,
and HOT PARTS hazards.
Consult symbols and related instructions below for
necessary actions to avoid the hazards.