Important Notes Before Use - Weldtronic TTIG200PADP Operating Manual

1.4 Important notes before use

▲ Do not operate or install this equipment without thoroughly reading this manual and the safety
precautions contained throughout.
 Save this manual and keep it handy for reference.
 Disconnect mains of the semi-automatic welding machine after finishing work or before a long break.
▲ DO NOT make any modifications to the machine. It may cause changes in the features and
deterioration of technical data.
▲ Any adaptations to this machine are prohibited and may void the warranty.
▲ Warranty is void if any damage to the machine is caused by misuse.
 Acceptable range of ambient temperature is from 10—40°C.
 Acceptable range of humidity is 20°C at 95% humidity.
 Specifications may change without previous notice.
▲ Fitted for commissioning
▲ Recommended outlet
TitanTig 200P ACDC Pro Operators Manual Issue. A 0516
▲ Important Note on TitanTig
200P ACDC Pro Input Power
Supply
This unit has been supplied with
a downgraded 15 Amp primary
supply plug for commissioning
purposes only. You are advised to
upgrade the input power plug
and lead to a minimum of 32A if
sustained usage at maximum
amperage is desired.
▲ WARNING
With the 15A plug supplied it is
recommended that the operator
does not exceed more than
180Amps, as use of higher
amperages over this amount may
lead to failure and overheating of
the 15A plug and circuit, which
may result in electrical supply
component damage
ultimately electrical fires.
and