Table of Contents
Advertisement
Mains supply – TitanTig 200P ACDC Pro
The INPUT primary cable is supplied with machine. Connect the machine to mains
according to your state legislation of where machine is being used. Connection can
be effected through plug or direct wiring. Supply system should be protected at all
times by the fuse stated in technical data section. Direct connection to mains can
be done by qualified electrical technician only.
Australian 240V Single Phase Plug variants – AS/NZS 3122
DO NOT USE
FITTED FOR COMMISSION
RECOMMEDED TYPE
TitanTig 200P ACDC Pro Operators Manual Issue. A 0516
Advertisement
Table of Contents
Troubleshooting
