Weldtronic TTIG200PADP Operating Manual page 14

STATIC (ESD) can damage PC boards.
MOVING PARTS can cause injury
 Keep away from moving parts.
 Keep away from pinch points such as drive rolls.
WELDING WIRE can cause injury.
 Do not press gun trigger until instructed to do so.
 Do not point gun toward any part or the body, other people, or any metal when
threading welding wire.
H.F. RADIATION can cause interference.
 High frequency (HF,) can interfere with radio, navigation, safety services, computers,
and communications equipment.
 Have only qualified persons familiar with electronic equipment perform this
installation.
 The user is responsible for having a qualified electrician promptly correct any
interference problem resulting from the installation.
 If notified by the FCC about interference, stop using the equipment at once.
 Have the installation regularly checked and maintained.
 Keep high-frequency source doors and panels tightly shut. Keep spark gaps at correct setting, and use
grounding and shielding to minimize the possibility of interference.
ARC WELDING can cause interference.
 Electromagnetic energy can interfere with sensitive electronic equipment such as
computers and computer-driven equipment such as robots.
 Be sure all equipment in the welding area is electromagnetically compatible.
 To reduce possible interference, keep weld cables as short as possible, close together,
and down low, such as on the floor.
 Locate welding operation 100 meters from any sensitive electronic equipment.
 Be sure this welding machine is installed and grounded according to this manual.
 If interference still occurs, the user must take extra measures such as moving the welding machine,
using shielded cables, using line filters, or shielding the work area
TitanTig 200P ACDC Pro Operators Manual Issue. A 0516
 Put on grounded wrist strap BEFORE handling boards or parts.
 Use proper static-proof bags and boxes to store, move, or ship PC boards.
.