Call Hold/Resume - Yealink SIP-T48G User Manual

To un-mute a call:
Press again to un-mute the call.

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress on the phone at any time. Other calls
can be made and received while placing the original call on hold. When you place a call on hold, your IP PBX may
play music to the other party while waiting.
To place a call on hold:
1. Press or tap the Hold soft key during a call.
The touch screen indicates that the call is on hold.
Note The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
To resume a held call:
1. Press or tap the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
• Tap the desired call, and then press
• Tap the desired call, and then tap the corresponding line key to retrieve it.
User Guide for the SIP-T48G IP Phone
or tap the Resume soft key to retrieve it.
61