Cisco Catalyst 2960 Command Reference Manual page 630

debug platform pm
Though visible in the command-line help strings, the stack-manager keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug platform pm command is the same as the no debug platform pm command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-38
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Catalyst 2960 Switch Debug Commands
78-16882-01