Cisco Catalyst 2960 Command Reference Manual page 291

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
This is an example of output when the show cluster command is entered on a cluster member switch:
Switch1> show cluster
Member switch for cluster "hapuna"
This is an example of output when the show cluster command is entered on a cluster member switch
that is configured as the standby cluster command switch:
Switch> show cluster
Member switch for cluster "hapuna"
This is an example of output when the show cluster command is entered on the cluster command switch
that has lost connectivity with member 1:
Switch> show cluster
Command switch for cluster "Ajang"
This is an example of output when the show cluster command is entered on a cluster member switch
that has lost connectivity with the cluster command switch:
Switch> show cluster
Member switch for cluster "hapuna"
Related Commands Command
cluster enable
show cluster candidates
show cluster members
78-16882-01
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Total number of members:
Status:
Time since last status change:
Redundancy:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Description
Enables a command-capable switch as the cluster command switch,
assigns a cluster name, and optionally assigns a member number to it.
Displays a list of candidate switches.
Displays information about the cluster members.
3
192.192.192.192
0000.0c07.ac14
8
80
3 (Standby command switch)
192.192.192.192
0000.0c07.ac14
8
80
7
1 members are unreachable
0 days, 0 hours, 5 minutes
Disabled
8
80
3
<UNKNOWN>
192.192.192.192
0000.0c07.ac14
8
80
Catalyst 2960 Switch Command Reference
show cluster
2-263