Debug Platform Ip Igmp Snooping - Cisco Catalyst 2960 Command Reference Manual

debug platform ip igmp snooping

debug platform ip igmp snooping
Use the debug platform ip igmp snooping privileged EXEC command to enable debugging of
platform-dependent Internet Group Management Protocol (IGMP) snooping. Use the no form of this
command to disable debugging.
Syntax Description all
di
error
event
group
mgmt
pak {ip-address |
error | ipopt | leave |
query | report | rx |
svi | tx}
retry
rpc [cfg | misc | vlan] Display IGMP snooping remote procedure call (RPC) event debug messages.
warn
Catalyst 2960 Switch Command Reference
B-30
debug platform ip igmp snooping {all | di | error | event | group | mgmt | pak | retry | rpc | warn}
debug platform ip igmp snooping pak {ip-address | error | ipopt | leave| query | report | rx | svi
| tx}
debug platform ip igmp snooping rpc [cfg | misc | vlan]
no debug platform ip igmp snooping {all | di | error | event | group | mgmt | pak | retry | rpc |
warn}
Display all IGMP snooping debug messages.
Display IGMP snooping destination index (di) coordination remote procedure
call (RPC) debug messages.
Display IGMP snooping error messages.
Display IGMP snooping event debug messages.
Display IGMP snooping group debug messages.
Display IGMP snooping management debug messages.
Display IGMP snooping packet event debug messages. The keywords have
these meanings:
ip-address—IP address of the IGMP group.
•
error—Display IGMP snooping packet error debug messages.
•
ipopt—Display IGMP snooping IP bridging options debug messages.
•
• leave—Display IGMP snooping leave debug messages.
query—Display IGMP snooping query debug messages.
•
• report—Display IGMP snooping report debug messages.
rx—Display IGMP snooping received packet debug messages.
•
svi—Display IGMP snooping switched virtual interface (SVI) packet
•
debug messages.
tx—Display IGMP snooping sent packet debug messages.
•
Display IGMP snooping retry debug messages.
The keywords have these meanings:
cfg—(Optional) Display IGMP snooping RPC debug messages.
•
• misc—(Optional) IGMP snooping miscellaneous RPC debug messages.
• vlan—(Optional) IGMP snooping VLAN assert RPC debug messages.
Display IGMP snooping warning messages.
Appendix B Catalyst 2960 Switch Debug Commands
78-16882-01