Unpacking Your Craftbot - CraftUnique CraftBot Desktop User Manual

UNPACKING YOUR CRAFTBOT

1. Place the CraftBot box on the ground
on a level surface. Make sure that there
is a lot of open space around you. Open
the box, make sure not to damage the
contents if using a blade. You will find
the quickstarter guide, along with the
invoice, located within the top protective
foam insert. Remove these.
2. You will then find the insert cradle which
contains the accessories and filament
spool. The cradle also acts as a support
for the extruder during shipping. The
CraftBot user manual can also be found
on the pendrive with the accessories.
We recommend that you use this users
manual to guide you through the setup
process. Keep it at hand as you unpack
the contentsof the box. If you feel that
anything is missing, feel free to contact
us by email at info@craftunique.com.
Remove the accessory cradle from your
CraftBot 3D printer.
9 Setting up your CraftBot