CraftUnique CraftBot Desktop User Manual page 27

NAVIGATING THROUGH THE LCD MENU
4
USB PRINT menu
Touch the "USB Print" button with the
pendrive icon to precede to the next display.
At this point, if you have already inserted a
USB card into the top of the CraftBot, you
will see a list of the contents. If the USB
pendrive is not inserted into the top of the
CraftBot to begin with, the initial icon will
appear grey, and all further actions will be
disabled. In this case though, it is possible
to print using CraftWare and a connection
to a host computer through the USB port located on the right hand side of your
CraftBot. Use the up and down arrow buttons to scroll through the possible
prints. Once you find one that tickles your fancy, select it by touching the file.
27 The first steps
It will be highlighted. At this point (after
setting up everything that you would
like in the pre-printing process such as
temperature or setting the axes to the
home position), you can continue on to
the actual printing by pressing the "print"
button located in the lower right hand
corner. You will be directed to another
screen during printing in which you can
pause and alter the speed real-time.