CraftUnique CraftBot Desktop User Manual page 5

RECOMMENDED USE AND WARNINGS
*Optimally the best mode for printing is directly with a USB card, which is unaffect-
ed by the operations from a computer. If you are using the CraftBot directly, make
sure that all systems that could possibly cause lag, such as screensavers, sleep or
hibernation mode, or videos/programs that could cause delays, have been dis-
abled. An uninterrupted stream is best for making prints, as any lag can cause
flaws in the final printed object, even making it necessary to re-print.
*Always use a surge protector with a circuit breaker.
*Never, ever attempt to open or fix the power supply. If you come across any prob-
lem, turn the machine off.
*Only use the CraftBot's power supply.
*Plug the CraftBot 3D printer and your computer into the same outlet to reduce the
possibility of interference.
*Do not plug the CraftBot into the same outlet as high power devices such as A/C,
heaters, or climate control devices, or large appliances, even kitchen appliances or
anything else that sucks out a lot of power in a short time.
*Do not use non recommended materials and filaments with the CraftBot.
*Keep the nozzle out of close contact with the build plate when not in use.
*Do not modify the CraftBot.
5 Recommended use and warnings