Chapter 2 Hardware Setup
There are some points should be paid attention to when setting up
B200P/BE200P.
2.1 Power supply
The board is powered by PCI slot, but some newest model PCs do not
provide +5V on PCI slots, in such cases, you have to set the jumper to
3.3V.
2.2 Slot compatibility
B200P/BE200P is compatible with 32-bit 3.3V PCI slot, 32-bit 5.0V PCI
slot, 64-bit 3.3V PCI slot and 64-bit 5.0V PCI slot except PCI-E slot; you
should confirm your slot type firstly and then insert B200P/BE200P into
any type of PCI slot as previously described. Some slots are described
like that.
1
2
3
4
5
OpenVox Communication Co. LTD.
B200P/BE200P on DAHDI User Manual
Figure 2 PCI-E and PCI slots
PCI-E × 1 slot
32-bit 3.3V PCI slot
32-bit 5.0V PCI slot
64-bit 3.3V PCI slot
64-bit 5.0V PCI slot
URL: www.openvox.cn
9