Advertisement
User Manual
Chapter 1 Overview
1. What is B200P/B400P
B200P/B400P series is a PCI 2.2 compliant card supporting 2/4 BRI S/T interfaces,
with an onboard multi NT power feeding circuit. NT/TE mode can be independently
configured on each of the 2 or 4 ports.
B200P/B400p series can be implemented for building Open Source Asterisk based
systems such as ISDN PBX and VoIP gateway.
Target Applications:
High Performance ISDN PC Cards
ISDN PABX for BRI
VoIP Gateways
ISDN LAN Routers for BRI
ISDN Least Cost Routers for BRI
ISDN Test Equipment for BRI
Main Features:
Two/Four integrated S/T interfaces
ITU-T I.430 and TBR 3 certified and S/T ISDN supporting in TE and NT mode
Integrated PCI bus interface (Spec.2.2) for 3.3V and 5V signal environments
DTMF detection on all B-channels
Multiparty audio conferences bridge
Onboard power feeding
PCM bus connectors daisy chaining
Each of the 2/4 ports can be independently configured for TE or NE mode
Full software and hardware compatible with bristuff and mISDN driver
Application ready: ｕse Asterisk to build your IP-PBX/Voicemail system
RoHS compliant
Certificates: CE, FCC
2.
What is Asterisk:
The Definition of Asterisk is described as follow:
Asterisk is a complete PBX in software. It runs on Linux, BSD,Windows (emulated)
and provides all of the features you would expect from a PBX and more. Asterisk does
voice over IP in four protocols, and can interoperate with almost all standards-based
telephony equipment using relatively inexpensive hardware.
VoIPon
www.voipon.co.uk
sales@voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Advertisement
