Table of Contents
Advertisement
# asterisk -vvvvvvgc
If Asterisk is already activate, run "asterisk –r" instead.
In the CLI, please run the following commands
"dahdi show channels" and "pri show spans":
*CLI> dahdi show channels
Chan Extension
Context
pseudo
default
1
from-isdn
2
from-isdn
4
from-internal
5
from-internal
*CLI> pri show spans
PRI span 1/0: Up, Active
PRI span 2/0: Up, Active
It is successfully installation if you can see the span is up and active and
not "In Alarm". Otherwise, please check the configuration files and
physical connections.
4. Dialplan edit
You should make sure that the context "from-isdn" and "from-internal"
are in extensions.conf. Here a simple example is given:
# vim /etc/asterisk/extensions.conf
OpenVox Communication Co. LTD.
B200P/BE200P on DAHDI User Manual
Language
MOH Interpret
default
default
default
default
default
Figure 7 channels and spans show
Blocked
State
In Service
In Service
In Service
In Service
In Service
URL: www.openvox.cn
25
Advertisement
Table of Contents
