OpenVox B200P User Manual page 14

input jack if it is need to provide power by external equipments,
please refer jumper setting section for more details.
 Plug ISDN lines into RJ-45 interfaces which set as TE mode and
ISDN phone lines into RJ-45 interface which set as NT mode
 Fix the board by a screw
 Plug back the AC power cable, and power on PC
Caution: During the above processes, an ESD wrist strap
is needed. Once power is on, you must not attempt to
install or take down the board. After hardware setup
appropriately, it is time to install software.
OpenVox Communication Co. LTD.
B200P/BE200P on DAHDI User Manual
URL: www.openvox.cn
13