Logger Type And Serial Number; Main Information; Probe Configuration; Channels - TESTO Testostor 171 Instruction Manual

Description of the "testostor 171 V1." dialog box
Once the data logger has been set up in INSTRUMENT,
NEW DEVICE, open the menu for the instrument icon
via the right mouse button. INSTRUMENT CONTROL
leads to the main window in which all of the status
information is clearly shown.
L
OGGER TYPE
You are informed about the connected logger type and
its serial number. If you are using several data loggers
simultaneously you can differentiate between the various
logger using this information.
M
AIN INFORMATION
Here you have the possibility of inputting freely
selectable information needed for programming. This
can include data on the sender or recipient, data on
transported goods etc. The input box has space for 250
characters.
22
Here is the example of a programmed
logger.
and S
ERIAL NUMBER
Description of the "testostor 171 V1." dialog box
P
ROBE CONFIGURATION
Carry out the probe configuration shown in the table.
The probe configuration determines the following ...
C
HANNELS
The channels/sockets of the connected data
logger type are available for selection.
P
ROBES
Select the probes from the list with which you
wish to work. The name "INTERNAL" in front of
the probe name indicates that it is an internal
channel (while "EXTERNAL" stands for external

channels).

/ L
UPPER LOWER IMIT VALUE
An upper and lower limit can be assigned to each
measurement channel. These limit values are
monitored in the logger. If the limits have been
exceeded, a limit counter allocated to the channel
calculates the number of measured values
outside the limit. This information is included in
the measurement protocol.
The exceeding of the limit can be indicated
acoustically (See O
connected signal device gives off an alarm if the
programmed limit values are exceeded or are not
reached (acoustically and optically).
You can call up a table summarizing the number
of times the limits have been exceeded by
clicking twice in the limit value on the limit value
column.
The limit values, the number of values outside the
limits, the measurement duration and the amount
of measurement time outside the limits are
shown.
). In testostor 1722, the
PTIONS
23