Advertisement
TV Tuner Operation
1
1.
Antenna/Cable TV signal input jack
2.
TV tuner connector
3.
TV tuner lock
Preparations
1.
Please connect this portable DVD player to Power and
connect it with earphones or connect it to external
equipments.
2.
Then connect the TV tuner to this portable DVD player
as the following steps:
Step 1.
Please align the TV tuner's connector and lock
with this portable DVD player's TV tuner
connector and lock. Then attach the TV tuner
to this portable DVD player.
(as figure (A) shown)
(A)
Step 2.
Then connect the RF coaxial cable or Antenna
cable to Antenna/Cable TV signal input jack of
the TV tuner.
(as figure (B) shown)
2
(B)
3
4
Antenna cable
1
RF coaxial cable
2
Receive Antenna TV signal
3
Receive TV signal from cable
4
For using RF coaxial cable ONLY
Before connecting the RF coaxial cable to Antenna/Cable TV signal
input of the TV tuner, remember to connect the RF coaxial cable
with cable transfer as the following figure shown.
NOTE: There are two kinds of cable transfers: one is for NTSC, the other is for PAL.
For using Antenna cable ONLY
After connecting the Antenna cable to Antenna/Cable TV signal
input jack of the TV tuner, remember to extend the Antenna cable
to receive the best quality of TV signal.
3
1
2
(PAL)
(NTSC)
HOW TO USE TV TUNER
Note: 1.
Make sure all the preparation be ready.
2.
TV reception quality might be different from the
area you are.
STEP 1.
Press Power on.
STEP 2.
<Mode> to switch to "Tuner".
Press
<Mode> a number of times, you can toggle
Press
between "S-Video", "P-Scan" or "Tuner".
STEP 3.
<TV Source> to choose the TV source
Press
from "Cable" or "Antenna".
Make sure to select the correct TV source.
STEP 4.
<Auto Search>, the TV tuner window
Press
as following shows on the screen.
Channel
56
Freq
415.3MHz
Favorite
Yes
Auto search
1.Display the current channel
2.Indicate the frequency of the current channel
3.Mark or unmark the current channel as your favorite channel
4.Tuner search automatically
STEP 5.
<UP> button or
Press
to choose the preferred option.
STEP 6.
<LEFT> button or
Press
button to select the preferred setting.
NOTE:
<LEFT> button to previous channel, or press
1.Channel:
Press
<RIGHT> button to next channel.
<LEFT> button to decrease the frequency or
2.Freq:
Press
<RIGHT> button to increase the frequency for the best tuning.
<LEFT> button or
3.Favorite:
Press
or "No".
<RIGHT> button, a tuner search starts automatically
4.Auto search: Press
and allows the channel to be confirmed.
*While doing Auto search for the first time, this portable DVD
player will select available TV channels. Yet, if more channels
become available in your area, you may need to repeat the Auto
search to update the available channels.
*Before doing Auto search, make sure to set the correct country
setting in the Screen TV Tuner Setup.
STEP 7.
<Auto Search> again, the TV tuner
Press
window disappear on the screen.
1
2
3
4
<DOWN> button
<RIGHT>
<RIGHT> button select "Yes"
Advertisement
