Table of Contents
Advertisement
TV Tuner Operation
Preparation
In order to receive a TV signal, please connect the unit to the supplied antenna,
to cable, or to satellite.
STEP 1.
Connect the RF coaxial cable or Aerial cable to Antenna/Cable TV
signal input jack on the left side of the portable DVD player as
shown in figure (A).
(A)
Antenna/Cable TV signal input jack
1
RF coaxial cable
3
Receive TV signal from cable
5
For using RF coaxial cable ONLY
Before connecting the RF coaxial cable to Antenna/Cable TV signal input jack on
the left side of the portable DVD player, remember to connect the RF coaxial cable
with cable transfer as shown in the following diagram.
NOTE: There are two kinds of cable transfers: one is for NTSC, the other is for PAL.
4
2
5
3
1
Aerial cable
2
Receive Antenna TV signal
4
(PAL)
(NTSC)
11
Advertisement
Table of Contents
