FCC and Safety Information... 4 Important Safety Instructions... 5 Precautions... 6 Selecting the type of disc for the type of TV connected... 7 Chapter 1. DVD Chapter 1. DVD Chapter 1. DVD Chapter 1. DVD Chapter 1. DVD 1-1 DVD Playback...8 Basic Playback...
Page 3
Table of Contents Chapter 4. Setup Chapter 4. Setup Chapter 4. Setup Chapter 4. Setup Chapter 4. Setup 4-1 Language Setup...24 On Screen Display (OSD) Language Setting... 24 DVD MENU Language Setting... 25 AUDIO Soundtrack Language Selection [DVD]... 26 SUBTITLE Language Selection [DVD]... 27 4-2 Screen Setup...
CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Please read these precautions before operating this unit. Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. Hold the plug firmly when connecting or disconnecting the AC power cord. Keep the AC power cord away from heating appliances.
Selecting the type of disc for the type of TV connected DVDs are recorded in PAL or NTSC formats. Please refer to the table below to find the appropriate format for your region. Connecting to a multi-system TV Connecting to a NTSC TV Connecting to a PAL TV...
The portable DVD player stops playback and displays the menu screen. After operation When the portable DVD player is not in use, remove the disc and press POWER to turn off the player. Close the display panel. << NOTE >>...
Press <PREVIOUS> during playback. When you press the button once midway through a chapter, the portable DVD player returns to the beginning of the chapter being played back. The player skips a chapter each time you press the button. Still Picture (PAUSE) Press <PAUSE>...
Repeat Viewing Press <1/ALL REPEAT> during playback. Each time you press the button, the disc will repeat a chapter or title. Press once: Chapter (Repeat chapter) Press twice: Title (Repeat title) Press three times: Disc (Repeat disc) Press four times: off (Repeat cancelled) *To return to normal playback <1/ALL REPEAT>...
When you turn on or remove the disc, the portable DVD player will playback the language which is selected at the initial setting. If you select a language which is not recorded on the disc, the portable DVD player will playback a prior language programmed on the disc.
When you turn on or remove the disc, the portable DVD player will playback the subtitle language which is selected at the initial setting. If you select a subtitle language which is not recorded on the disc, the portable DVD player will playback a prior subtitle language programmed on the disc.
1-2 Convenient functions Using DVD Menu Some DVD discs have unique menu. For example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio and subtitle language. Although the DVD menu’s contents and operation vary from disc to disc, the following explains basic operation when this feature is used. Press <TITLE>...
Audio DVD Preparation Attache the battery or connect the portable DVD player to a wall outlet. If connecting to external equipment, please perform the following: Press on the power button of the TV set, and select “Video” as the TV input.
Press <PREVIOUS> during playback. When you press the button once midway through a track, the portable DVD player returns to the beginning of the track being played back. The player skips a track each time the button is pressed. Pause Press <PAUSE>...
You can play Kodak picture CDs for viewing on the screen. Load a kodak picture CD. After few seconds, the portable DVD player starts to play back the pictures in slide show automatically. You can press the number buttons corresponding to the order of the picture, then press <PLAY/SEL.>.
3-1 Playing Kodak Picture CDs Thumbnail Mode Press <TITLE> to enter Thumbnail mode. While in Thumbnail mode, there are 20 pictures per page for viewing. Press < selected picture in its original size, press When you view the picture in its original size, you can press Press <NEXT>...
You can play JPEG pictures CDs for viewing on the screen. Load a JPEG picture CD. After few seconds, the portable DVD player starts to play back the pictures in a slide show automatically. You can press the number buttons corresponding to the order of the picture, then press <PLAY/SEL.>.
3-2 Playing JPEG Picture CDs Playing Mode Press <NEXT> to view the next picture or picture. Press <RIGHT> button or <RIGHT> button to rotate right by 90 degrees. Press <LEFT> button to rotate left by 90 degrees. Press *To pause playback ---Press <PAUSE>.
Special F Special F Special F Special Functions Special F unctions unctions unctions unctions Basic Playback Press POWER on. Press <OPEN> to open the disc cover. Insert the MP3 disc and close the cover. Close the cover. Playback will start automatically after approximately 5 seconds. MP3 files will begin to playback automatically.
3-4 Playing a CD containing JPEG pictures and MP3 music Basic Playback Load a disc containing JPEG pictures and MP3 music. After few seconds, the unit will enter File Manager. Under File Manager Menu, press Press <PLAY/SEL.> to playback the picture or MP3 music. *To pause playback ---Press <PAUSE>.
Special F Special F Special F Special Functions Special F unctions unctions unctions unctions Thumbnail Mode Press <TITLE> to enter Thumbnail mode. While in Thumbnail mode, there are 20 pictures per page. Press < the selected picture in its original size, press When you view the picture in its original size, you can press Press <NEXT>...
3-5 Playing JPEG & MP3 files from MMC/SD card Basic Playback Load a MMC/SD card containing JPEG pictures and MP3 music. After few seconds, the unit will enter File Manager. Under File Manager Menu, press Press <PLAY/SEL.> to playback the picture or MP3 music. *To pause playback ---Press <PAUSE>.
Setup Setup Setup Setup Setup On Screen Display (OSD) Language Setting Allows you to set various languages for the on screen display (OSD). Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP>...
4-1 Language Setup DVD Menu Language Setting You can select a language that has been recorded on the disc menu. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>.
<SETUP> to exit or select EXIT from SETUP MENU screen. ---Press For your reference: If the language selected is not recorded on the disc, the portable DVD player will playback the top- priority language of the disc. 4-1 Language Setup <DOWN>...
<SETUP> to exit or select EXIT from SETUP MENU screen. ---Press For your reference: If the language selected is not recorded on the disc, the portable DVD player will playback the top- priority language of the disc. -continued <DOWN> button to select “Language Setup”, and then <DOWN>...
Setup Setup Setup Setup Setup TV Type Setting The kind of TV set (4:3 or 16:9) connected to the player and a wide-screen picture type for a 4:3 TV can be selected. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>.
4-2 Screen Setup Screen Saver Setting This function will ONLY function when the player is stopped. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>. The waiting time of the screen saver is set to 10 minutes.
Setup Setup Setup Setup Setup TV System Setting The player provides “PAL”, “NTSC” and “AUTO” settings for your selection. When connecting the portable DVD player to your TV, set the “TV SYSTEM” from the on-screen display to the format that is compatible with your TV’s system.
Setup Setup Setup Setup Setup Video Output Setting -continued If you choose “P-Scan”, the following will show on the screen as a reminder. Screen Setup TV Type Screen Saver Your TV support P-Scan TV System Video Output : Move If you TV doesn’t support P-Scan feature, press <<Troubleshooting>>...
4-3 Audio Setup Digital Out Setting The portable DVD player provides three options, “SPDIF/PCM”, “SPDIF/RAW” and “Off” for the digital out setting. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>.
Setup Setup Setup Setup Setup Analog Out Setting Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / setting. Press <PLAY/SEL.>. Audio Setup Digital Out Analog Out : Move *To return to the SETUP MENU screen <LEFT>...
You can only change the MMC/SD setting to “On” or “Off” while there is no disc inside the DVD player. If you set the MMC/SD setting to “On”, the portable DVD player can only read SD/MMC card. The portable DVD player can’t playback any discs.
Setup Setup Setup Setup Setup Parental Control Setting [DVD] A built-in viewer rating setting enables you to lock the videos that you do not want children to view. For example, setting the ratting limit to PG-13 will prevent the unit from playing video rated R, NC-17 or X unless the correct password is entered.
4-4 Custom Setup Password Setting [DVD] You can change the password on the portable DVD player. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Enter your old password and then press...
Setup Setup Setup Setup Setup Angle Mark Setting [DVD] You can choose to display or hide the angle mark “ Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>.
4-4 Custom Setup Default Setting You may re-set the previous settings in CUSTOM SETUP to the default setting. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <RIGHT> button to select “Read”, and then press <<...
Setup Setup Setup Setup Setup Panel Setting The portable DVD player provides two options for panel adjustment: “Normal” or “4:3”. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “PANEL”. Press <LEFT>...
4-5 LCD Setup Brightness Setting Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “BRIGHT”. Press <LEFT> button or setting, and then the panel will change to the selected setting. << NOTE>> The bright range is from +9 to -9. BRIGHT BRIGHT: : : : : BRIGHT...
Setup Setup Setup Setup Setup Contrast Setting You can adjust the contrast of video with this setting to a soothing view for your eyes. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “CONTRAST”. Press <LEFT>...
4-5 LCD Setup Sharpness Setting You can adjust the sharpness of video with this setting to a soothing view for your eyes. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “SHARPNESS”. Press <LEFT>...
Before requesting service for your portable DVD player, check the chart below for a possible cause of the problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and restore proper operation.
5-2 Disc Handling and Maintenance Handling Precautions Hold the disc by the edges so the surface will not be soiled with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils that can leave indentations or scratch the surface of the disc.
F F F F F or Y or Y or Y our R our R eference eference or Your R or Y our Reference our R eference eference Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.).
Reproductor DVD portátil – Manual del usuario Ajustes iniciales Pulse el botón En pantalla aparece el menú CONFIGURACIÓN. Configuración idioma Menú Audio Subtítulo : Mover Pulse las teclas <ARRIBA> <ABAJO> <IZDA.> <DCHA.> para seleccionar la opción deseada. Pulse el botón Para los ajustes: Repita el procedimiento descrito arriba y véanse las instrucciones del OSD para efectuar los ajustes siguientes.
Page 48
Esquema del menú Configuración Idioma (Las opciones de idioma sólo se dan como referencia. Para la información adecuada, véase el reproductor DVD portátil.) Menú Audio Subtítulos Inglés Francés Alemán Italiano Español Portugués Inglés Chino Japonés Francés Alemán Italiano Español Portugués Otros Inglés Chino...
Page 49
Esquema del menú Configuración Pantalla Tipo de TV Protector de pantalla Activado Sistema TV Salida de vídeo Audio Salida digital Salida analógica Personalizada MMC/SD Control menores Contraseña Marca perspectiva Activado Predeterminado NOTA: 1. PG: 2. PG-13: 3. R: 4. NC-17: - continuación 4:3 PS 4:3 LB...
Page 50
Esquema del menú Configuración FIGURA 1-1 Configuración pantalla Tipo de TV Protector de pantalla Su TV admite barrido progresivo SÍ Pulse PLAY Pulse STOP : Mover Si selecciona la opción “Barrido progresivo”, los datos anteriores se mostrarán en pantalla como recordatorio. Si su televisor admite el barrido progresivo, <PLA <PLA Y/SEL.>...
Preparación Conecte el reproductor DVD portátil a una toma eléctrica y conéctelo a los auriculares u otros equipos externos. Si lo conecta a equipos externos: Encienda su televisor y seleccione “Vídeo” como entrada de señal de TV. Encienda su sistema de alta fidelidad si el reproductor de DVD está conectado a un sistema alta fidelidad.
Saltar capítulos (hacia adelante o hacia atrás) Saltar hacia adelante <SIGUIENTE> <SIGUIENTE> <SIGUIENTE> <SIGUIENTE> durante la reproducción. <SIGUIENTE> Pulse el botón Salta un capítulo cada vez que pulsa el botón. Saltar hacia atrás <ANTERIOR> <ANTERIOR> <ANTERIOR> durante la reproducción. <ANTERIOR> <ANTERIOR>...
Page 53
Visualización en pantalla de la información sobre la escena <INFO.> <INFO.> <INFO.> <INFO.> varias veces hasta que aparezcan el número de <INFO.> Pulse el botón título, número de capítulo y otros datos en pantalla. Para dejar de mostrar la información sobre la escena <INFO.>...
Seleccionar ángulos de perspectiva Con ciertos discos, se pueden visualizar las mismas escenas desde puntos de vista diferentes. Pulse el botón Pulse varias veces el botón deseada esté seleccionada. Nota: Esta función sólo está disponible en los discos que disponen de varios ángulos grabados.
Page 55
Ajustes de color del LCD Puede ajustar el color de vídeo para obtener una representación más agradable para sus ojos. Pulse el botón ajustes LCD. Pulse el botón Pulse los botones <IZD color deseado. << NOTA>> Puede ajustar un color entre +9 y -9. COLOR: COLOR: COLOR:...
Page 56
Ajustes de brillo del LCD Puede aumentar o reducir el brillo de la imagen de vídeo manualmente. Pulse el botón ajustes LCD. Pulse el botón (BRILLO). Pulse los botones <IZD brillo deseado. << NOTA>> Puede ajustar un brillo entre +9 y -9. BRIGHT BRIGHT: : : : : BRIGHT...
Ajuste del contraste Puede ajustar el contraste de vídeo para obtener una representación más agradable para sus ojos. Pulse el botón ajustes LCD. Pulse el botón “CONTRAST” (CONTRASTE). Pulse los botones <IZD contraste deseado. << << << << NOTA> > > > > > Puede ajustar un contraste entre +9 y -9. <<...
Page 58
Nitidez de imagen en el LCD Puede ajustar la nitidez de vídeo para obtener una representación más agradable para sus ojos. Pulse el botón ajustes LCD. Pulse el botón “SHARPNESS” (NITIDEZ). Pulse los botones <IZD nitidez deseado. SHARPNESS: SHARPNESS: SHARPNESS: SHARPNESS: SHARPNESS: SHARPNESS:...
Manual do utilizador do leitor DVD portátil Definições iniciais Prima o botão Apresentação do ecrã do MENU SETUP. Configuração do idioma Menu Áudio Legenda : Mover Utilize o botão <PARA CIMA> <PARA BAIXO> <ESQUERDA> <DIREITA> para seleccionar a opção pretendida. Prima o botão Para as definições: Repita o procedimento acima e consulte as instruções do OSD para realizar a seguinte...
Page 60
DIAGRAMA DO MENU CONFIGURAR Idioma (As opções do idioma são apenas para referência, para obter as informações correctas, consulte o seu leitor de DVD portátil.) O.S.D. Menu Áudio Legendas Inglês Francês Alemão Italiano Espanhol Português Inglês Chinês Japonês Francês Alemão Italiano Espanhol Português...
Page 61
DIAGRAMA DO SETUP MENU Ecrã Tipo de TV Protector de ecrã Sistema da TV Saída do vídeo Áudio Saída digital Saída analógica Personalizar MMC/SD Controlo parental Palavra-passe Símbolo do ângulo Aceso Predefinido NOTA: 1. PG: 2. PG-13: 3. R: 4. NC-17: - continuação 4:3 PS 4:3 LB...
Page 62
DIAGRAMA DO MENU SETUP FIGURA 1-1 Configuração do ecrã Tipo de televisão Protector de ecrã A sua TV suporta o varrimento progressivo Prima PLAY NÃO Prima STOP : Mover Se seleccionar “Varrimento-P”, a mensagem acima aparece no ecrã como lembrete. De seguida, se a sua TV suportar a opção “Varrimento-P”, prima o <PLA <PLA <PLA...
Preparações Ligue este leitor de DVD portátil à alimentação e ligue-o aos auriculares/auscultadores ou ligue-o a equipamentos externos. Se ligar o leitor de DVD portátil a equipamentos externos: Prima o botão de alimentação da televisão e seleccione “Vídeo” como a entrada da televisão.
Page 64
Saltar capítulos para a frente ou para trás Saltar para a frente <NEXT> <NEXT> <NEXT> <NEXT> <NEXT> durante a reprodução. Prima o botão Prima este botão para saltar um capítulo. Saltar para trás <PREVIOUS> <PREVIOUS> <PREVIOUS> durante a reprodução. <PREVIOUS> <PREVIOUS>...
Page 65
Apresentação das informações relativas a uma cena <INFO.> <INFO.> <INFO.> <INFO.> <INFO.> diversas vezes, número do título, número do Prima o botão capítulo e outras informações aparecem no ecrã. Para parar a apresentação das informações no ecrã <INFO.> diversas vezes até as informações desaparecerem. Prima o botão Selecção do idioma da faixa de áudio O idioma da pista sonora pode ser alterado, se esta opção estiver disponível no DVD.
Page 66
Selecção dos ângulos Em alguns discos, as mesmas cenas podem ser visualizadas a partir de diversos ângulos. Prima o botão Prima o botão visualização pretendido ser seleccionado. Nota: Esta função só funciona em discos onde foram gravados ângulos de visualização diferentes. Se esta função não estiver disponível, aparece o ícone inválido “...
Page 67
Definição das cores do LCD Pode utilizar esta definição para ajustar a cor do vídeo para uma vista de disparo dos seus olhos. Prima o botão LCD aparecem no ecrã. Prima o botão (Cor). <ESQUERD <ESQ <ESQ Prima o botão <ESQ <ESQ definição preferida da cor, e de seguida, o painel muda para a definição seleccionada.
Page 68
Definição da luminosidade do LCD Pode aumentar ou diminuir a luminosidade do vídeo. Prima o botão LCD aparecem no ecrã. Prima o botão (BRILHO). Prima o botão <ESQ <ESQ <ESQ <ESQ <ESQUERD definição preferida da luminosidade, e de seguida, o painel muda para a definição seleccionada.
Page 69
Definição do Contraste do LCD Pode utilizar esta definição para ajustar o contraste do vídeo para um valor confortável para os seus olhos. <LCD>. As informações relativas às definições do LCD Prima aparecem no ecrã. <LCD> diversas vezes para seleccionar “CONTRAST” Prima (CONTRASTE).
Page 70
Definição de Nitidez do LCD Pode utilizar esta definição para ajustar a nitidez do vídeo para um valor confortável para os seus olhos. <LCD>. As informações relativas às definições do LCD Prima aparecem no ecrã. <LCD> diversas vezes para seleccionar “SHARPNESS” Prima (NITIDEZ).
Manuel de l’utilisateur du lecteur DVD portable Paramètres initiaux Appuyez sur le bouton L’écran MENU CONFIG. s’affiche. Configuration de la langue Menu Audio Sous-titre : Dépl. Utilisez le bouton <HAUT> <BAS> <GAUCHE> <DROITE> pour sélectionner l’option désirée. Appuyez sur le bouton Pour les paramétrages : Répétez la procédure décrite ci-dessus et suivez les instructions OSD pour effectuer le paramétrage ci-après.
Page 72
SCHÉMA DU MENU DE CONFIGURATION Langue (Les options de langues servent uniquement de référence. Veuillez consulter votre lecteur DVD portable pour les informations correctes). O.S.D. Menu Audio Sous-titres Anglais Français Allemand Italien Espagnol Portugais Anglais Chinois Japonais Français Allemand Italien Espagnol Portugais Autres...
Page 73
SCHÉMA DU MENU DE CONFIGURATION - suite Écran Type TV Écran de veille Système TV Sortie vidéo Audio Sortie numérique Sortie analogique Personnalisé MMC/SD Contrôle parental Mot de passe Visualisation angles On Par défaut REMARQUE : 1. PG : 2. PG-13: 3.
Page 74
SCHÉMA DU MENU DE CONFIGURATION - suite FIGURE 1-1 Configuration écran Type TV Écran de veille Votre TV prend en charge le balayage progressif Appuyez sur PLAY NON Appuyez sur STOP : Dépl. Si vous sélectionnez le balayage progressif (P-Scan), les options ci-dessus s’affichent sur l’écran comme rappel.
Préparations Veuillez connecter ce lecteur DVD portable à l’alimentation et connectez-le avec des écouteurs ou aux équipements extérieurs. En cas de connexion à des équipements extérieurs : Allumez votre téléviseur et sélectionnez “Video” comme entrée TV. Appuyez sur le bouton Power du système stéréo si le lecteur a été connecté à celui-ci. Mettez le bouton AV OUT/IN sur AV OUT.
Page 76
Saut avant ou retour aux chapitres Saut avant Appuyez sur le bouton Vous sauterez un chapitre à chaque fois que vous appuierez sur le bouton. Saut arrière Appuyez sur le bouton Vous sauterez un chapitre à chaque fois que vous appuierez sur le bouton. Image immobile (PAUSE) Appuyez une fois sur le bouton L’écran est suspendu.
Affichage des informations sur la scène Appuyez plusieurs fois sur numéro du titre, le numéro du chapitre et autres informations s’affichent à l’écran. Pour arrêter l’affichage des informations sur la scène <INFO.> jusqu’à ce que les informations disparaissent. Appuyez plusieurs fois sur Sélection de la langue des pistes sonores Vous pouvez changer la langue des pistes sonores du disque si cette option est disponible sur votre disque.
Sélection des angles Pour certains disques, les mêmes scènes peuvent être visualisées sous différents angles. Appuyez sur le bouton Appuyez plusieurs fois sur de prise de vues préféré soit sélectionné. Remarque : Cette fonction n’est disponible qu’avec des disques sur lesquels ont été...
Page 79
Paramétrage couleur de l’écran LCD Vous pouvez régler la couleur de l’image avec ce paramétrage pour votre confort visuel. <LCD>. Les informations sur le paramétrage de <LCD> <LCD> Appuyez sur l’écran LCD s’afficheront. Appuyez plusieurs fois sur (COULEUR). Appuyez sur le bouton <GA paramétrage de couleur préféré.
Page 80
Paramétrage de la luminosité de l’écran LCD Vous pouvez augmenter ou diminuer manuellement la luminosité de l’image. <LCD> <LCD> <LCD> <LCD> <LCD>, les informations sur le paramétrage de l’écran Appuyez sur LCD s’afficheront. Appuyez plusieurs fois sur (CLAIR). Appuyez sur le bouton <GA paramétrage de luminosité...
Contraste de l'écran LCD Vous pouvez régler le contraste vidéo à l'aide de ce paramètre pour votre confort visuel. <LCD>. Les informations de paramétrage de l’écran Appuyez sur LCD s'affichent. Appuyez plusieurs fois sur (CONTRASTE). Appuyez sur le bouton <GA niveau de contraste.
Page 82
Netteté de l'écran LCD Vous pouvez régler la netteté vidéo à l'aide de ce paramètre pour votre confort visuel. <LCD>. Les informations de paramétrage de l’écran Appuyez sur LCD s'affichent. Appuyez plusieurs fois sur “SHARPNESS” (NETTETÉ). Appuyez sur le bouton <LEFT> paramétrage de netteté.
Need help?
Do you have a question about the PL510 and is the answer not in the manual?
Questions and answers