82-154-00140 LEFT SIDE DIAGRAM REMOTE CONTROL DIAGRAM Portable DVD Player Quick Guide DC IN jack POWER button TV tuner connector Welcome TV tuner lock to the Portable DVD Player Quick Guide. This Guide will instruct you to install your Portable DVD Player in a quick and easy way.
Page 2
REMOTE CONTROL OPERATION RANGE STEP 2. Connect it with earphones or connect it STEP 3. Open the display panel. (C) to external equipment. (B) Point the remote control unit no more than about 6 meters from If you want to enjoy higher listening and viewing quality, you can the remote control sensor and within about 60 of the front of connect this Portable DVD player to external equipment, such as...
INPUT FROM EXTERNAL EQUIPMENT B. TO CHARGE THE BATTERY PACK WHILE Using the Battery Pack THE BATTERY PACK ATTACHED TO THIS You could input images and sounds from external equip- PORTABLE DVD PLAYER “The shape of the following battery pack is only for reference; the actual shape differs from the battery packs of different specifications.”...
Page 4
HOW TO USE TV TUNER Step 2. Then connect the RF coaxial cable or Antenna TV Tuner Operation cable to Antenna/Cable TV signal input jack of Note: 1. Make sure all the preparation be ready. the TV tuner. TV reception quality might be different from the (as figure (B) shown) area you are.
Page 5
HOW TO USE TV TUNER -continued << NOTE >> To select the preferred available channel Country Setting Remember to choose the correct country setting, or only black <NEXT> or <PREVIOUS> to choose the picture will show on the screen. If so, that means your portable DVD Press For the channel search setting, please choose the correct country player doesn’t support TV tuner function.
Need help?
Do you have a question about the PL408T and is the answer not in the manual?
Questions and answers