Table of Contents FCC and Safety Information... 4 Important Safety Instructions... 5 Precautions... 6 Selecting the type of disc for the type of TV connected... 7 Chapter 1. DVD 1-1 DVD Playback... 8 Basic Playback... 8 Stopping Playback and Returning to The Menu Screen (If a Menu Is Available on The Disc)... 8 Stopping Playback...
Page 3
Table of Contents -continued 4-3 AUDIO Setup... 27 Digital Out Setting... 27 Analog Out Setting...28 4-4 Custom Setup... 29 Parental Control Setting [DVD]... 29 Password Setting [DVD]... 30 Angle Mark Setting [DVD]... 31 Default Setting... 32 4-5 LCD Setup... 33 Panel Setting...
FCC and Safety Information CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Precautions Please read these precautions before operating this unit. Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. Hold the plug firmly when connecting or disconnecting the AC power cord. Keep the AC power cord away from heating appliances.
Selecting the type of disc for the type of TV connected DVDs are recorded in PAL or NTSC formats. Please refer to the table below to find the appropriate format for your region. Connecting to a multi-system TV Connecting to a NTSC TV Connecting to a PAL TV En 7...
The portable DVD player stops playback and displays the menu screen. After operation When the portable DVD player is not in use, remove the disc and press POWER to turn off the player. Close the display panel. << NOTE >>...
Press <PREVIOUS> during playback. When you press the button once midway through a chapter, the portable DVD player returns to the beginning of the chapter being played back. The player skips a chapter each time you press the button. Still Picture (PAUSE) Press <PAUSE>...
When you turn on or remove the disc, the portable DVD player will playback the language which is selected at the initial setting. If you select a language which is not recorded on the disc, the portable DVD player will playback a prior language programmed on the disc.
When you turn on or remove the disc, the portable DVD player will playback the subtitle language which is selected at the initial setting. If you select a subtitle language which is not recorded on the disc, the portable DVD player will playback a prior subtitle language programmed on the disc.
Convenient functions Mute the DVD Player In some cases, you may need to mute the portable DVD player temporarily. The portable DVD player provides a MUTE function for your selections. Press <MUTE> button during playback. When “MUTE” appears on the screen, the portable DVD player is mute. To resume sound, press the button until “MUTE OFF”...
Audio CD Playback Preparation Attach the battery or connect the portable DVD player to a wall outlet. If connecting to external equipment, please perform the following: Press on the power button of the TV set, and select “Video” as the TV input.
Skipping Back Press <PREVIOUS> during playback. When you press the button once midway through a track, the portable DVD player returns to the beginning of the track being played. The player skips a track each time the button is pressed. Pause Press <PAUSE>...
You can play Kodak picture CDs for viewing on the screen. Load a kodak picture CD. After few seconds, the portable DVD player starts to play back the pictures in slide show automatically. You can press the number buttons corresponding to the order of the picture, then press <PLAY/SEL.>.
Playing Kodak Picture CDs Thumbnail Mode Press <TITLE> to enter Thumbnail mode. While in Thumbnail mode, there are 12 pictures per page for viewing. Press < the selected picture in its original size, press When you view the picture in its original size, you can press thumbnail.
You can play JPEG pictures CDs for viewing on the screen. Load a JPEG picture CD. After few seconds, the portable DVD player starts to play back the pictures in slide show automatically. You can press the number buttons corresponding to the order of the picture, then press <PLAY/SEL.>.
Playing JPEG picture CDs Slide Show Press <NEXT> to view the next picture or previous picture. Press <RIGHT> button or <RIGHT> button to rotate right by 90 degrees. Press <LEFT> button to rotate left by 90 degrees. Press *To pause playback <PAUSE>.
Language Setup On Screen Display (OSD) Language Setting Allows you to set various languages for the on screen display (OSD). Press <SETUP> in the stop mode. Press <UP> button / then press <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>.
Language Setup DVD Menu Language Setting You can select a language that has been recorded on the disc menu. Press <SETUP> in the stop mode. Press <UP> button / then press Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>.
<SETUP> to exit from SETUP MENU screen. Press For your reference: If the language selected is not recorded on the disc, the portable DVD player will playback the top-priority language of the disc. -continued <DOWN> button to select “Language Setup”, and <DOWN>...
<SETUP> to exit from SETUP MENU screen. Press For your reference: If the language selected is not recorded on the disc, the portable DVD player will playback the top-priority language of the disc. -continued <DOWN> button to select “Language Setup”, and <PLAY/SEL.>.
Screen Setup TV Type Setting The kind of TV set (4:3 or 16:9) connected to the player and a wide-screen picture type for a 4:3 TV can be selected. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>.
Screen Setup TV System Setting The player provides “PAL”, “NTSC” and “AUTO” settings for your selection. When connecting the portable DVD player to your TV, set the “TV SYSTEM” from the on-screen display to the format that is compatible with your TV’s system.
Screen Setup -continued Video Output Setting Please choose the preferred video output according to the output format. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / output setting. Press <PLAY/SEL.>.
Page 26
If you choose “P-Scan” as the video output setting, make sure your TV set supports P-Scan input feature and the YUV cable be properly connected to your TV and the portable DVD player. If your TV doesn’t support P-Scan feature, press <<Troubleshooting>>...
Audio Setup Digital Out Setting The portable DVD player provides three options, “SPDIF/PCM”, “SPDIF/RAW” and “Off” for the digital out setting. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Press <UP>...
A built-in viewer rating setting enables you to lock the videos that you do not want children to view. For example, if you set it to PG-13, then the portable DVD player will not play the videos rated R, NC-17 or X unless the correct password is entered.
Custom Setup Password Setting [DVD] You can change the password to the portable DVD player by selections. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Enter your old password and then press...
<PLAY/SEL.>. << NOTE >> Whether the ANGLE MARK is set to “On” or “Off” with this setting, when you press <ANGLE> button, the portable DVD player will still playback multi-angles that are available on the dvd discs. Custom Setup Parental Ctrl...
Custom Setup Default Setting You may re-set the previous settings in CUSTOM SETUP to the default setting. Press <SETUP> in the stop mode. Press <UP> button / press <PLAY/SEL.>. Press <UP> button / press <PLAY/SEL.>. Press <RIGHT> button to select “Read”, and then press <<...
LCD Setup Panel Setting The portable DVD player provides three panel adjustment options: “Normal”, “16:9” or “4:3”. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “PANEL”. Press <LEFT> button or setting, and then the panel will change to the selected setting.
LCD Setup Bright Setting You can manually increase or decrease the brightness of the video. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “BRIGHT”. Press <LEFT> button or setting, and then the panel will change to the selected setting. BRIGHT BRIGHT: : : : : BRIGHT...
Troubleshooting Before requesting service for the portable DVD player, check the chart below for a possible cause of the problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and restore proper operation.
Disc Handling and Maintenance Handling Precautions Hold the disc by the edges so the surface will not be soiled with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent.
Definition of Terms Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
Reproductor DVD portátil –Manual del usuario Ajustes iniciales Pulse el botón En pantalla aparece el menú CONFIGURACIÓN. Conf. Idioma Menú Audio Subtítulo Pulse las teclas <ARRIBA> <ABAJO> <IZDA.> <DCHA.> para seleccionar la opción deseada. Pulse el botón Para los ajustes: Repita el procedimiento descrito arriba y véanse las instrucciones del OSD para efectuar los ajustes siguientes.
Page 39
Esquema del menú Configuración Idioma (Las opciones de idioma sólo se dan como referencia. Para la información adecuada, véase el reproductor DVD portátil.) Menú Audio Subtítulo Inglés Francés Alemán Italiano Español Portugués Inglés Chino Japonés Francés Alemán Italiano Español Portugués Otros Inglés Chino...
Page 40
Esquema del menú Configuración Pantalla Tipo TV Systema TV Salida Video Audio Salida Digital Salida Analógica Personalizada Ctrl Paterno Contraseña Marca Ángulo Predt. NOTA: 1. PG: 2. PG-13: 3. R: 4. NC-17: - continuación 4:3 PS 4:3 LB 16:9 NTSC Auto S-Video P-SCAN...
Page 41
Esquema del menú Configuración FIGURA 1-1 Conf. Pantalla Tipo TV TV System Your TV support P-Scan Video Output Si selecciona la opción “P-SCAN” (Barrido progresivo), los datos anteriores se mostrarán en pantalla como recordatorio. Si su televisor admite el barrido <PLAY/SEL.>.
Preparación Conecte la batería o conecte el reproductor de DVD a una toma eléctrica. Si lo conecta a equipos externos, haga lo siguiente: Encienda su televisor y seleccione “Vídeo” como entrada de señal de TV. Encienda su sistema de alta fidelidad si el reproductor está conectado a un sistema alta fidelidad.
Saltar capítulos (hacia adelante o hacia atrás) Saltar hacia adelante <SIGUIENTE> durante la reproducción. Pulse el botón Salta un capítulo cada vez que pulsa el botón. Saltar hacia atrás <ANTERIOR> durante la reproducción. Pulse el botón Salta un capítulo cada vez que pulsa el botón. PAUSA Pulse una vez el botón La pantalla se detiene en modo de pausa.
Page 44
Visualización en pantalla de la información sobre la escena <INFO.> varias veces hasta que aparezcan el número de Pulse el botón título, número de capítulo y otros datos en pantalla. *Para dejar de mostrar la información sobre la escena <INFO.> repetidamente hasta que desaparezca la ---Pulse información.
Función de silencio <MUTE> durante la reproducción. Pulse el botón Nota: Cuando en pantalla aparezca el mensaje “Silencio”, el reproductor DVD portátil no emite ningún sonido. *Para restablecer el sonido ---Pulse de nuevo el botón mensaje “Silencio OFF”. Seleccionar ángulos de perspectiva Con ciertos discos, se pueden visualizar las mismas escenas desde puntos de vista diferentes.
Page 46
Ajustes de color del LCD Puede ajustar el color de vídeo para obtener una representación más agradable para sus ojos. Pulse el botón LCD. Pulse el botón “COLOR”. Pulse los botones <IZDA.> o <DCHA.> para seleccionar el ajuste de color deseado. COLOR: COLOR: COLOR:...
Page 47
Ajustes de cierre del panel LCD Pulse el botón LCD. Pulse el botón “CLOSE” (Cerrar). Pulse los botones <IZDA.> o <DCHA.> para seleccionar el ajuste de panel deseado. CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: CLOSE: *Salir de las operaciones de configuración ---Pulse el botón los ajustes LCD desaparezca.
Manuel de l ’utilisateur du lecteur DVD portable Paramètres initiaux Appuyez sur le bouton L’écran MENU CONFIG. s’affiche. Config. Langue Menu Audio Sous-titre Utilisez le bouton <HAUT> <BAS> <GAUCHE> <DROITE> pour sélectionner l’option désirée. Appuyez sur le bouton Pour les paramétrages : Répétez la procédure décrite ci-dessus et suivez les instructions OSD pour effectuer le paramétrage ci-après.
Page 49
SCHÉMA DU MENU DE CONFIGURATION Langue (Les options de langues servent uniquement de référence. Veuillez consulter votre lecteur DVD portable pour les informations correctes.). O.S.D. Menu Audio Sous-titre Anglais Français German (Allemand) Italian (Italien) Espagnol Portugais Anglais Chinois Japonais Français German (Allemand) Italian (Italien) Espagnol...
Page 50
SCHÉMA DU MENU DE CONFIGURATION Écran Type TV Système TV Sortie Vidéo Audio Numérique Analogique Personnalisée Ctrl Parental Mot de passe Marque Angle Défaut REMARQUE : 1. PG : Surveillance parentale recommandée. 2. PG-13 : Ce matériel n’est pas approprié pour des enfants de moins de 13 ans. 3.
Page 51
SCHÉMA DU MENU DE CONFIGURATION FIGURE 1-1 Si vous sélectionnez le balayage progressif (P-Scan), les options ci-dessus s’affichent sur l’écran comme rappel. Si votre téléviseur prend en charge la fonction de balayage progressif (P-Scan), appuyez sur Sinon, appuyez sur Remarque : Si vous choisissez le balayage progressif “P-Scan”...
Préparation Connectez la batterie ou le lecteur de DVD portable au secteur. Si vous le connecter à un matériel externe, procédez comme suit : Allumez votre téléviseur et sélectionnez “Video” comme entrée TV. Appuyez sur le bouton d’alimentation du système stéréo si vous avez connecté le lecteur de DVD à...
Page 53
Saut avant ou retour aux chapitres Saut avant Appuyez sur le bouton Vous sauterez un chapitre à chaque fois que vous appuierez sur le bouton. Saut arrière Appuyez sur le bouton Vous sauterez un chapitre à chaque fois que vous appuierez sur le bouton. Image immobile (PAUSE) Appuyez une fois sur le bouton L’écran est suspendu.
Affichage des informations sur la scène Appuyez plusieurs fois sur numéro du titre, le numéro du chapitre et autres informations s’affichent à l’écran. *Pour arrêter l’affichage des informations sur la scène ---Appuyez plusieurs fois sur disparaissent. Sélection de la langue des pistes sonores Vous pouvez changer la langue des pistes sonores du disque si cette option est disponible sur votre disque.
Fonction Muet Appuyez sur le bouton Remarque : Si l’indication “Silence” s’affiche à l’écran, cela signifie que le lecteur DVD portable est désactivé. *Pour restaurer le son ---Appuyez à nouveau sur “Arrêt Silence” s’affiche à l’écran. Sélection des angles Pour certains disques, les mêmes scènes peuvent être visualisées sous différents angles. Appuyez sur le bouton Appuyez plusieurs fois sur prise de vues préféré...
Page 56
Paramétrage couleur de l’écran LCD Vous pouvez régler la couleur de l’image avec ce paramétrage pour votre confort visuel. <LCD>. Les informations sur le paramétrage de l’écran Appuyez sur LCD s’afficheront à l’écran. Appuyez plusieurs fois sur (Couleur). Appuyez sur le bouton <GAUCHE> ou <DROITE> pour choisir le paramétrage de couleur préféré.
Page 57
Paramétrage de fermeture du panneau LCD <LCD>. Les informations sur le paramétrage de l’écran Appuyez sur LCD s’afficheront à l’écran. Appuyez plusieurs fois sur (Fermer). Appuyez sur le bouton <GAUCHE> ou <DROITE> pour choisir le paramétrage de panneau préféré. Le panneau adoptera le paramétrage sélectionné.
Manual do utilizador do leitor DVD portátil Definições iniciais Prima o botão Apresentação do ecrã do MENU SETUP. Conf. idioma Menu Áudio Legenda Utilize o botão <CIMA> <BAIXO> <ESQUERDA> <DIREITA> para seleccionar a opção pretendida. Prima o botão Para as definições: Repita o procedimento acima e consulte as instruções do OSD para realizar a seguinte definição: Conf.
Page 59
DIAGRAMA DO MENU CONFIGURAR Idioma (As opções do idioma são apenas para referência, para obter as informações correctas, consulte o seu leitor de DVD portátil.) Menu Áudio Legenda Inglês Francês Alemão Italiano Espanhol Português Inglês Chinês Japonês Francês Alemão Italiano Espanhol Português Outros...
Page 60
DIAGRAMA DO MENU SETUP Ecrã Tipo de TV Sist. TV Saída Vídeo Áudio Saída Digital Saída Analógica Personalizada Parental Ctrl Password Marca Áng. Predef. NOTA: 1. PG: 2. PG-13: 3. R: 4. NC-17: - continuação 4:3 PS 4:3 LB 16:9 NTSC Auto S-Video...
Page 61
DIAGRAMA DO MENU SETUP FIGURA 1-1 Se seleccionar “P-SCAN” (Varrimento-P), a mensagem acima aparece no ecrã como lembrete. De seguida, se a sua TV suportar a opção “P-SCAN” (Varrimento-P), prima o botão <STOP>. Nota: Se seleccionar “P-SCAN” (Varrimento-P) como a definição da saída de vídeo, certifique-se de que a TV suporta a função de entrada “P-SCAN”...
Preparações Insira a bateria ou ligue o leitor de DVD portátil a uma tomada eléctrica. Se estiver a ligar equipamento externo, faça o seguinte: Prima o botão de alimentação da televisão e seleccione “Vídeo” como a entrada da televisão. Se tiver sido conectado um sistema estéreo ao leitor de DVD, ligue o sistema estéreo. Faça com que a AV OUT/IN deslize para a AV OUT.
Page 63
Saltar capítulos para a frente ou para trás Saltar para a frente <NEXT> durante a reprodução. Prima o botão Prima este botão para saltar um capítulo. Saltar para trás <PREVIOUS> durante a reprodução. Prima o botão Prima este botão para saltar um capítulo. Imagem fixa (PAUSAR) <PAUSE>...
Page 64
Apresentação das informações relativas a uma cena <INFO.> diversas vezes, número do título, número do Prima o botão capítulo e outras informações aparecem no ecrã. *Para parar a apresentação das informações no ecrã ---Prima o botão desaparecerem. Selecção do idioma da faixa de áudio O idioma da pista sonora pode ser alterado, se esta opção estiver disponível no DVD.
Page 65
Função de corte do som <MUTE> durante a reprodução. Prima o botão Nota: Quando a opção “Opção Mute” aparece no ecrã, é porque este leitor de DVD portátil não tem som. *Para repor o som ---Prima o botão no ecrã. Selecção dos ângulos Em alguns discos, as mesmas cenas podem ser visualizadas a partir de diversos ângulos.
Page 66
Definição das cores do LCD Pode utilizar esta definição para ajustar a cor do vídeo para um valor confortável para os seus olhos. Prima o botão LCD aparecem no ecrã. Prima o botão (Cor). Prima o botão <ESQUERDA> ou <DIREITA> para seleccionar a definição preferida da cor, e de seguida, o painel muda para a definição seleccionada.
Page 67
Definição para fechar o painel LCD Prima o botão LCD aparecem no ecrã. Prima o botão (Fechar). Prima o botão <ESQUERDA> ou <DIREITA> para seleccionar a definição preferida do painel, e de seguida, o painel muda para a definição seleccionada. CLOSE: CLOSE: CLOSE:...
Need help?
Do you have a question about the PL607 and is the answer not in the manual?
Questions and answers