Advanced Bionics Naida CI Q90 Instructions For Use Manual page 3

Hide thumbs Also See for Naida CI Q90:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Warnings and Cautions
Warnings
Do not use the AB myPilot remote control when it is
plugged into power sources such as wall outlets.
Do not use or store the AB myPilot in shirt pockets if
the recipient has a pacemaker, due to a risk of inter-
ference. Contact a health care professional for more
information.
Cautions
The AB myPilot comes with power supplies specifi-
cally designed for the AB myPilot. Do not use other
power supplies not supplied by Advanced Bionics or a
Phonak distributor. For replacement power supplies,
contact Advanced Bionics.
Do not use the AB myPilot when instructed not to use
electronic devices on airplanes.
The AB myPilot should not come within 1 cm (1/2" )
of the Naída CI while stimulating the implant. Doing
so could cause the Naída CI to lose communication
with the AB myPilot. If this happens, power cycle the
Naída CI by briefly removing and then reattaching
the battery.
If the AB myPilot stops being transmitting commands
to the Naída CI, it might be necessary to re-pair the AB
myPilot with the Naída CI. Follow the steps in the Pair-
ing the AB myPilot section of this user guide.
If volume commands from the AB myPilot to the Naída
CI seem erratic, position the AB myPilot within 30 cm
(12" ) of the Naída CI. If the problem persists, re-pair
the AB myPilot and the Naída CI.
The digitally-coded, inductive transmission technology
used in the AB myPilot prevents interference from most
other devices. When operating the AB myPilot near
2

Advertisement

Table of Contents
loading

Table of Contents