Credits Based Accounting System - Funkwerk bintec R4100 User Manual

2
ISDN Credits Submenu
6 bintec User's Guide
R4100 Setup Tool
[CREDITS][ISDN CREDITS][EDIT]: Configure ppp Credits
Surveillance (Changing a value will
reset all measured values!)
Measure Time (sec)
Maximum Number of Incoming Connections
Maximum Number of Outgoing Connections
Maximum Charge
Maximum Time for Incoming Connections (sec)
Maximum Time for Outgoing Connections (sec)
Maximum Number of Current Incoming Connections
Maximum Number of Current Outgoing Connections
SAVE
The configuration menus for the CREDITS
➜
resp. subsystems are used for activating and deactivating the
ISDNLOGIN
Credits Based Accounting System and for defining the limits for number, dura-
tion and cost of the incoming and outgoing ISDN connections.
The / / menu consists of the following fields:
CAPI PPP ISDNLOGIN
Field
Surveillance
Measure Time (sec)
Funkwerk Enterprise Communications GmbH
CANCEL
➜
ISDN C
REDITS
Description
Defines whether the Credits Based Accounting
System is to be activated for the respective
subsystem. Possible values: off (default value),
on.
If the system is on you can define the parame-
ters listed below.
Time in seconds during which the limits for
number, duration and cost of incoming and out-
going connections apply. The measured values
are reset to 0 when the time expires.
The default value is 86400.
MyGateway
on
86400
off
on
100
off
on
28800
on
28800
off
off
➜ ➜
resp.
CAPI PPP
CREDITS