Philips **HFL5011T/12 Installation Manual page 49

 Navigate to the [Philips TV Remote App]
menu and open it
 You will see below items:
o [Enable]:
possible with PTA is disabled via [Off]
or enabled via [On]
o [XTV]: XTV is a Philips proprietary
protocol which allows TV control via
mobile application. If XTV is [On], TV
shall allow mobile application to
control the TV. If set to [Off], XTV
protocol shall be disabled in the TV and
hence no mobile application shall be
able to interact with TV using the XTV
protocol
Note: [XTV] is only accessible when
[Enable] is set to [On]
o [Digital Media Renderer - DMR]: You
can put DMR [Off], when you put it
[On] you make it possible to push
pictures, video and audio via the PTA
 Navigate to the [Wi-Fi Miracast] menu
and open it
 You will see below items:
o [Enable]: You can disable Wifi Miracast
feature via [Off] or enable via [On]
o [Wi-Fi Miracast Connections]: You can
clear the list of connected devices in
the ongoing session
 Navigate to the [Wi-Fi Hotspot] menu and
open it
 You will see below items:
o [No]: 3
rd
hotspot screen to allow the guest to
connect their mobile device to the TV
over Wifi Direct
o [Yes]: 3
rd
hotspot screen to allow the guest to
connect their mobile device to the TV
over Wifi Direct
Note: Hotspot is originally designed to
be used in combination with AirServer
app, but not limited to this app.
AirServer is a third party application,
see https://www.airserver.com/
- 48 -
Making a connection
party apps cannot invoke
party apps can invoke