Date And Time - Philips **HFL5011T/12 Installation Manual

6.9 Date and Time

 Navigate to the [Date and Time] menu
and open it
 You will see the screen on the left
 Navigate to the [Source] menu
 You will see below items:
o [Automatic Channels]: Date and time
is received via broadcast channels
o [Automatic NTP]: Date and time is
received via the network
o [Manual]: Date and time is set
manually but will not be remembered
after a power cycle. This can be used in
combination with JAPIT or SerialXpress
to set the clock on startup via
commands
 Navigate to the [Source Channel] menu
 You will see a list of installed channels,
one item will be highlighted, this is the
current selected channel where the TV
will obtain the clock from
Note: This menu is only accessible when
[Automatic Channels] is selected in
[Source]
- 42 -