Smartinfo; Smartinfo Show; Smartinfo Show Information In The Dashboard - Philips **HFL5011T/12 Installation Manual

14.

SmartInfo

The SmartInfo feature can be used in two ways, as a picture slide show (SlideShow) or as interactive
pages (Browser). The two ways of using SmartInfo are exclusive, only one of the two features can be
enabled in a specific TV. SmartInfo can display the pictures or the webpages by pressing "SmartInfo".
To close SmartInfo any button on the remote can be pressed. For both cases the pages are stored in
TV memory and can be changed via USB flash drive or CMND.

14.1 SmartInfo Show

SmartInfo used as Show contains pictures uploaded in TV memory which are changed by the TV set
automatically every 8 seconds. The pictures are displayed in a loop and the guest cannot influence the
speed or the order of displaying.
How to upload pictures for SmartInfo Show:

Create JPEG graphics files with a maximum resolution of 1920 x 1080 pixels. Pictures with
lower resolution will be upscaled to 1920x1080 pixels

File name should be: file_01.jpg

For multiple picture files the names should be consecutive. Example for 4 pictures in SmartInfo
o file_01.jpg
o file_02.jpg
o file_03.jpg
o file_04.jpg

Save the files into to following folder on your USB device:

TPM1532HE_CloneData/MasterCloneData/SmartInfoShow/ (xxHFL5011)
TPM1531HE_CloneData/MasterCloneData/SmartInfoShow/ (xxHFL7011)
The folder 'TPM1532HE_CloneData' or 'TPM1531HE_CloneData' should be in the root of the
USB flash drive

Switch ON the TV, insert the USB with the new content

Go to [Professional settings] [Upgrade and Clone] [Clone USB to TV] menu and press "OK" to
upload the pictures in the TV

Once done, exit [Professional settings] and reboot the TV and check your changes

14.2 SmartInfo show information in the dashboard

On top of above chapter you can also add information that can be shown in the dashboard. You can
modify the information be editing the 'SmartInfoShowMetaData.xml' file that is in the same folder as
the pictures: '.../MasterCloneData/SmartInfoShow/SmartInfoShowMetaData.xml'.
Below you can see a screenshot of the dashboard and the information:

You can change the 'Smart Info' title, icon and text

You can change/add the icons, their label and the image linked to it

You can change the order of the images shown in the Smartinfo Show
- 80 -