Philips **HFL5011T/12 Installation Manual page 53

unlock 3rd party apps. You can find the
ID on www.geonames.org, search for
your location, open it and check the
location ID as marked in the screenshot
on the left
o [Premises Name]: This is the name that
is seen in the top of the home menu
 Navigate to the [Power] menu and open it
 You will see below items:
o [Power On]: After a power reboot of
the TV the TV will restart in [Standby]
or in [On] mode, depending on the
selection
o [Standby Mode]: The TV will quickly
turn on (higher power consumption in
stand-by) when [Fast] is selected, TV
will consume less power (but will have
a slower startup time) when selecting
[Green]
Note: For RF installations, it's always
best to use Green, for IP installations
it's always best to use Fast
o [Reboot Everyday]: You can choose to
reboot the TV once a day if set to [On]
and your [Standby Mode] is set to
[Fast], this improves the stability of the
TV. The reboot will happen 24 hours
after the TV is put to Standby. You can
also disable this via [Off].
Note: This reboot will not be seen by a
guest in the room. Reboot everyday
should always be [On] unless other
mechanisms are created to reboot the
TV daily
o [Auto Standby]: If [On] the TV will go to
STBY by itself after 10 minutes if no
video signal is there, it will go to STBY if
no user interaction is there for 4 hours.
You can also put this [Off]
- 52 -