Network Installation Wizard - Philips **HFL5011T/12 Installation Manual

8. Network installation wizard

To connect to a network you have to go to the [Professional Settings] [Wireless and Networks]
[Connect to Network] menu.
Note: Some screens will be shown depending on your settings or selections made, some screens will not
be shown
 Wired, Wireless, WPS, WPS with PIN code
selection
 When 'Wired' was selected you will go to
the next screen where you will see a
message that the router is contentiously
scanned until a network connection is
found
 Once a network is found you will see a
screen that the wired network is
connected
Note: The yellow connector is to be used
for Serial Xpress and not for a wired
network connection
 When 'Wireless' was selected you will see
that the TV is scanning for wireless
networks and it will show the networks
that were found
 After selecting a network (and entering
the password if needed) you will get
message that the wireless network is
connected, the name of the network is
mentioned and also the encryption
 When 'WPS' was selected you will see that
you have to press the WPS button on the
router and press within 2 minutes on the
connect button
 Once you pressed you will get a
'connecting' message
 Once connected you will get a message
- 68 -