Switch On Settings; Channel Settings - Philips **HFL5011T/12 Installation Manual

6.4 Switch on settings

6.4.1

Channel Settings

 Navigate to the [RF Upgrade Settings]
menu and open it
 You will see below items:
o [Frequency]: The frequency for CMND
playout can be modified in this menu
Note: Default this should be set to 498
MHz. If for some reason you need to
change
recommended to use a frequency
between 474 MHz and 858 MHz in steps
of
When an RF upgrade happens, the TV
will first do a scan on the frequency set
here. If nothing is found it will scan
between 474 MHz and 858 MHz in steps
of 8MHz. So if you do a playout on
another frequency as set in the TV, the
TV will still find it.
 Navigate to the [Switch On Settings] menu
and open it
 You will see the screen on the left
 In this menu you will be able to set all
Switch on settings, these are the menu
items that a guest can change, the values
you set here are the settings applied when
the guest wakes up the TV
 Navigate to the [Channel Settings] [Switch
On Channel Filter] menu and open it
 You will see a list of channel filters, your
selection will be the default selected
channel filter when opening the channel
list
 This list also contains the theme's
Note: The list you see in the screenshot is
depending on the installed content
- 24 -
this frequency,
8MHz (DVBT-range).
it's