Localcustomdashboard In The Clone File - Philips **HFL5011T/12 Installation Manual

16.3 LocalCustomDashboard in the clone file

After you have set your settings correctly you can clone TV to USB to add your local custom dashboard.
Depending on your set following are the folder names used in the root of the USB device containing
the clone data:

For xxHFL5011: TPM1532HE_CloneData/MasterCloneData/

For xxHFL7011: TPM1531HE_CloneData/MasterCloneData/
Go to the local custom dashboard via .../MasterCloneData/LocalCustomDashboard/
In the professional menu, when [Dashboard] [Mode] is set to [Custom] you can set [Dashboard]
[Custom Settings] [Source] to [Local]. In this case the TV shall load the custom dashboard from the
flash memory if available.
By default the TV shall not have any pages in the flash when coming out of factory.
If in the professional menu, [Dashboard] [Custom Settings] [Server Settings] [Fallback] is set to [Off],
then the TV shall fall back to the default dashboard if there is no network connection to the server.
You need to make sure that the files in the /LocalCustomDashboard/ folder are CEHTML compliant
along with the JAPIT WIXP plugin. The total size should not exceed 64MB.
If in the professional menu, [Dashboard] [Custom Settings] [Source] is set to [Server] and the TV is
unable to connect to the configured server then it shall fall back to the custom dashboard stored
locally, if [Dashboard] [Custom Settings] [Server Settings] [Fallback] is set to [On] along with valid
fallback files.
- 88 -