Replacing Switching Power Supply - ELNA CE10 Service Manual

Replacing Switching Power Supply

4
5
3
6
Replacement of Switching Power Supply
1
2
7
To remove:
1 Remove face cover, belt cover, front cover and rear
cover
2 Remove Screws (A)
machine socket and fixing plate.
3 Pull out the Machine socket unit connector
4 Remove screw (C)
5 Remove Screws (D)
power supply
6
To attach:
6 Follow the above procedurte in reverse.
1
Screw (A)
2
Screw (B)
3
Screw (C)
4
Screw (D)
5
Idler
6
Machine socket unit connector (primary circuit)
7
Switching power supply unit
29
1
,(B) 2 and remove the
3 and remove the Idler.
4
(2 pieces) and Switching
to the handwheel side.
6 .