Replacing Printed Circuit Board - ELNA CE10 Service Manual

To replace the printed circuit board A, follow the instructions below.
1
1
3

Replacing Printed Circuit Board

2
1
1
To remove:
1 Remove the front cover. (See page 6)
2 Pull out the connectors of printed circuit board F
LCD Harness, Inverter and Touch panel.
3 Remove screws (5 pieces)
circuit board A
To attach:
4 Follow the above procedure in reverse.
1 Screws (5 pieces)
2
Printed circuit board (A)
3
Card guide
20
and the Printed
1
2 .