Recovery Mode - Eiki EK-800U Service Manual

Chapter 5 Firmware Upgrade
Section 2: Recovery Mode
Note: If upgrade fail, select restore, the upgrade will follow the last setting and jump to the page
"Upgrading in progress" directly.
5-2-1 Recovery of LAN
Note: If the LAN recovery in previous page is not work,
Clear TFTP upgrade setting of PW808.
1. Set up
- AC Power on the projector, let projector in
standby mode.
- Pressing '' Up" key then pressing '' Power " key.
- When you see the RJ45's LED is flashing twice
- Re-Power on
- Connect projector with Mini USB cable to PC.
2. Please download the latest firmware program file
from website, Unzip the file and keep on your
desktop.
- Double click the folder.
- Choose the upgrade file based on the system of
PC.
- 64-bit system execute FlashUpgrader_x64.exe
- 32-bit system execute FlashUpgrader_x32.exe
- Unzip the file.
5-10
EK-800U