Installation under Windows Vista / Server2008 / 7 /
Server2008R2 / 8 / Server2012 / Server2012R2 / 10 (Parallel
Interface with Plug & Play Enabled)
Note: If an undefined device is created after installation of the printer driver, follow the procedure described in the
section If plug-and-play installation fails under Windows
Connect the printer to the PC with a parallel interface cable.
Turn on the printer.
Set the printer parameters in the system mode.
B-SX4 Series and B-SX5 Series
CENTRO. MODE → ECP
PLUG & PLAY→ ON
B-SA4 Series, B-852-R, B-452-R, B-SX6T (305 dpi), B-SX8T (305 dpi), B-EX4 Series, B-EX6 Series
PLUG & PLAY → ON
Note: For the parameter setting procedure, refer to Section 6.2 Parameter Setting on the Printer.
Turn on the PC.
Note: Log on as the user with administrative privilege.
After the system is started, the installation of the device driver software is automatically started.
After a while, the installation of the printer driver is completed.
When the installation is completed, a new printer icon is added to the Printer folder.
- 44 -