You can set various functions of this printer driver in the "Properties" and "Printing Preferences".
Property setting menus in the "Printing Preferences"
Right-click the printer icon, and select
the "Printing Preferences".
The following tabs are provided.
3.1 Page setup
Page Setup tab
Printing position tab
User Commands tab
: Fully supported.
Allows configuring the size of the label stock and
registering it with a name in advance.
Allows specifying the orientation of an image.
When enabled, the print will be a mirror image.
When enabled, the print will be white on black.
When disabled, the print will be black on white.
Allows saving the settings of this printer driver such
as fine adjustment values. When a preset setting
file is selected, the current settings will be replaced
by the settings of that preset file.
Allows specifying the offset in horizontal and vertical
between 0º (bottom first) and 180º (top first).
Allows setting the printer command to be sent at the
start and the end of the job or at the start and the
end of the label in the print job.
Allows inserting binary data in bar code font.
- 49 -
X: Use the default.