Download  Print this page

Toshiba B-452-R Printer Driver Operating Manual Page 16

Hide thumbs

Advertisement

 Installation method by operating systems
OS
Plug and Play is not used.
RS-232C
Windows
Section 2.2 Install under Windows
2000
2000/XP/Server2003
Windows XP
Windows
Server 2003
Windows
Section 2.3 Install under Windows
Vista
Vista/Server2008/7/
Server2008R2/8/Server
Windows
2012/Server2012R2/ 10
Server 2008
Windows 7
Windows
Server 2008
R2
Windows 8
Windows 10
*1: If you choose the parallel interface with plug and play enabled, you need to change some parameter settings on the
The "plug and play" feature has been disabled as default for the parallel interface connection.
printer.
following.
In the case installing a shared printer, follow the procedure described in "To print on the shared printer" in
Section 2.2 Installation under Windows 2000/XP/Server2003 and Section 2.3 Installation under Windows
Vista/Server2008/7/Server2008R2/8/Server2012/Server2012R2/10. When you want to use Plug and Play,
follow the above procedure.
 Printer parameter settings when installing the printer driver via parallel interface with plug and play enabled:
B-SX4 Series and B-SX5 Series
Start the printer in the system mode, enter the <2>PARAMETER SET menu, and set the following parameters
as below:
CENTRO. MODE: ....................................... ECP (Default: SPP) Enables an installation of the printer driver
PLUG & PLAY: ON (Default: OFF) ........... Enables monitoring the printer status. (
When you use the bi-directional communication, set the CENTRO. MODE to ECP and PLUG & PLAY to ON,
respectively. The parameter setting procedure is provided in Section 6.2 Parameter Setting on the Printer.
B-SA4 Series, B-852-R, B-452-R, B-SX6T-R, B-SX8T-R, B-EX4 Series and B-462-R
Start the printer in the system mode, enter <2>PARAMETER SET menu, and set the following parameter:
PLUG & PLAY: ON (Default: OFF) ........... Enables an installation of the printer driver with plug and play
Since the printer status monitor cannot be used, disable the "Bi-directional support" in the Properties of the
printer driver.
LAN
Parallel
Bluetooth
with plug and play
Preferences in Section 3.6 Tools Tab.)
Connection method
Plug and Play is used.
USB
Section 2.4 Install under
Windows 2000 (USB interface
with plug and play enabled)
Section 2.5 Install under
Windows XP/Server2003 (USB
interface with plug and play
enabled.)
Section 2.6 Install under
Windows Vista/Server2008/7/
Server2008R2/8/Server2012/Se
rver2012R2/10 (USB
connection with plug and play
enabled)
- 14 -
Parallel (*1)
Section 2.7 Install under
Windows 2000 (Parallel
interface with plug and play
enabled)
Section 2.8 Install under
Windows XP/Server2003
(Parallel interface with plug
and play enabled)
Section 2.9 Install under
Windows
Vista/Server2008/7 /
Server2008R2/8/Server2012
/Server2012R2/10 (Parallel
interface with plug and play
enabled)
See the
Status Window

Advertisement

Table of Contents

This manual is also suitable for:

B-452-ts-rB-sx5t-ts12-qpB-sx5t-ts22-qqB-sx5t-ts22-qq-usB-sx5t-ts22-qpB-sx5t-ts22-qm-r ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: