Toshiba B-452-R Printer Driver Operating Manual page 25

5.
Select the "Local Port", and click the [New Port]
button.
6.
Enter the network path of the shared printer (e.g.
\\*****\TECB-SA4), then click the [OK] button.
7.
When the port setting is completed, click the [OK] button to close the "Properties" screen.
Note: After installing this printer driver, be sure to disable the Bi-directional support. For details, refer to Section
6.1 How to Enable Bi-directional Communication Support.
Since the setup information is stored in each PC that shares the printer, please configure the printer driver
settings after the completion of the port setting.
- 23 -