Changing The Unit Of Measure; Bluetooth Interface; Data Transmission To Other Devices - Bosch GLM 50 C Original Instructions Manual

22 | English

Changing the Unit of Measure

Unit of measure "m" (metres) is set by default.
Switch the measuring tool on.
Press and hold the 7 [Func] button to enter the "basic configurations" menu. Select
"m/cm" (for 3 601 K72 C40 and 3 601 K72 C80) or "ft/m"(for 3 601 K72 C00).
Press button 3 [+] or button 8 [–], to change the unit of measure.
Press the On/Off button 5 [ ] to exit the menu item. The selected setting remains
saved after you switch off the measuring tool.
® Interface

Data Transmission to other Devices

The measuring tool is equipped with a Bluetooth® module, which enables data trans-
mission via radio technology to certain mobile terminals/devices with a Bluetooth® in-
terface (e.g., smartphones, tablets).
For information on the necessary system requirements for a Bluetooth® connection,
please refer to the Bosch website at
www.bosch-pt.com
 For more information, visit the Bosch product page, see QR code, page 8.
For data transmission via Bluetooth®, time delays between mobile terminal/device
and measuring tool may occur. This can be possible due to the distance between both
devices or the object being measured.
Activating the ® Interface for Data Transmission to a Mobile Terminal/
Device
To activate the Bluetooth® interface, press the Bluetooth® button 6 on the measuring
tool.To activate the Bluetooth® signal, press the Bluetooth® button 6 or the button
3 [+] once again. Ensure that the Bluetooth® interface is activated on your mobile ter-
minal/device.
To expand the functionality of the mobile terminal/device and to simplify the data pro-
cessing, special Bosch applications (apps) are available. These can be downloaded in
the respective stores, depending on the terminal/device.
The connection between mobile terminal/device and measuring tool is established af-
ter the Bosch application has started. If multiple active measuring tools are found, se-
lect the appropriate measuring tool using the serial number.
The connection status as well as the active connection (a) are displayed in the status
bar (h) of the measuring tool.
1 609 92A 3UB | (15.3.17) Bosch Power Tools