Table of Contents
Advertisement
To talk with a person in the monitored room
PT
OR
Off-hook.
Press AUTO ANS/MUTE
or go off-hook.
To cancel a monitor
PT
At the monitored telephone
7
Off-hook.
To stop a monitor temporarily while on-hook
PT
At the monitored telephone
Press AUTO ANS/MUTE.
•
You can monitor using a PT with an AUTO ANS/MUTE button or a single line telephone
(SLT) with a MUTE button.
•
The AUTO ANS/MUTE button light shows the current status as follows:
Off: Not set
Flashing red: Set (Ready for monitoring)
Talk.
3
5
0
Enter 735.
Enter 0.
Press the AUTO ANS/MUTE button
to start room monitoring again.
1.7 Setting the Telephone According to Your Needs
C.Tone
Enter #.
On-hook.
User Manual
91
Advertisement
Table of Contents
